The release agent and daily cleaning is stopped in time on the roller for cleaning, release agent can effectively prevent ink dry in the mesh. The release agent is mainly through softens and dissolves the mesh of ink to achieve the purpose of cleaning. The first component B ( vial ) into a component ( bottle ) is uniformly mixed, release agent and then use the paintbrush dipped in a small amount of mixed liquor ( from film ) the cots with wet, at room temperature for 20 minutes, release agent for foam powder, release agent with brush or soft copper wire brush gently sweeping loose objects, if you still think thorough enough, then again. Finally, dip in with clean water wipe ( or cotton wipe and clean up. ).

Matters needing attention:

Model 9800 + SYS brand

Method of using external release agent dissolved mold release agent

Product specifications 550ml main use cleaning anilox roll Gravure version roll

Strong film-removing agent, washing liquid version, Anilox cleaning agent

Model: 9800 +

Specifications: 550ml (Group 500ml, group 50ml )

22kg (Group 20kg, group 2kg )

Use: clean dry compound machine coating roller dot has been cured of residual adhesive.

The 1 group a group B ratio and optimum use of time for 7 days.

2 according to the amount of time will be a B ratio ( B ratio 10 : 1).

3 because of the special ingredients to coagulate, before use, must be heated into a liquid, then the matching use.

4 the goods are stimulated, corrosion, the operation to wear protective glasses and gloves, and to prevent the inhalation of vapors.

5 not the goods will be splashed into eyes or skin.

6 in case of eye or skin contact, rinse immediately with plenty of water, and then seek medical treatment.

Packaging: plastic bottles (20 bottles per box )

Release agent characteristics:

The 1 release agent effective removal of residual stains, prevents the heightof version

The 2 release agent prominent effect, fast, clean thoroughly

Zhengzhou [ www.yinshuahaocai.cn ] because, you are welcome to telephone