Description

- Amplifies 802.11b/g wireless network/broadband (WLAN/Wifi) signals
- Whopping 1W/1000mW power output rating
- Bi-directional amplification (only need to install one amplifier in the network/on the router/AP for all clients to benefit from the added signal strength)
- Works with both access points (AP), wireless routers, and wifi adapter cards
- Supports standard SMA antenna connectors
- Dramatically improved network coverage and range
- 30dBm (1W) output
- Supports IEEE802.11b/g
- Amplification frequency range: 2400MHz ~ 2500MHz
- Supports both unidirectional and omnidirectional antennas
- 100V~240V AC adapter included
- English user's guide included
- High gain long range antenna and connection cable included
- To use, simply remove the original antenna from your router/ap/wifi card, then connect the SMA connection cable to the router/ap/wifi card's antenna port.

Indoor Broadband Amplifier Signal Booster for 802.11b/g Wireless Routers

-The easiest way to expand your wireless network's signal strength
-Works with IEEE 802.11g and 802.11b wireless LAN devices
-Stronger output power
-Increase your wireless coverage and throughput
-Equipped with Signal Activity LED
-Easy to install - just plug in and it begings working
-Improves the link quality and coverage distance of WLAN devices
-1,000mW output power
-Booster can be used for various environments
-Supplied with detachable 5 dbi antenna
-Bi-directional, half-duplex, time division duplex senses RF carrier from transmitter automatically switch receiving to transmitting mode
-Frequency response: +/- 1 dB over operating range
-2.4 ~ 2.5 GHz frequency range
-12 dB Receiver Gain
-15dB Transmit Gain
-Two (2) reverse SMA jack connectors
-Constructed of cast aluminum
-Regulatory Approvals: FCC, UL, RoHS

Specification

-Operating Range: 2400~2500 MHz
-Operating Mode: Bi-directional, half-duplex, time division duplex senses RF carrier from transmitter and automatically switch receiving to transmitting mode
-Connector Type: SMA Receptacle (50 ohm)
-Transmit Gain: 15dB (Adjustable)
-Input Trigger Power: 5 ~20 dBm
-Optimal Input Power: 9 ~ 13 dBm
-Receiver Gain: ≦12 dB
-Noise Figure: 3.5dB typical
-Frequency Response: ±1dB over operating range
-Power Adaptor: 5~7V /DC 105~240V for AC Adapter
-Operating Temp.: -20 to +70℃
-Operating Humidity: Up to 95% relative humidity
-Material: Cast Aluminum
-Package Weight: 560g
-Booster (cm): 7.8cm(L) x 5.6cm(W) x 2.9cm(H)
-Packaging: 22cm(L) x 15cm(W) x 6cm(H)