Features
- Program or configure Altera devices from 1.8V, 2.5V, 3.3V to 5V.
- Reliable and cost-effective download adapter for Altera FPGA and CPLD development.
- Supports Active Serial (AS), JTAG and Passive Serial (PS) mode.
- Allow users to perform the following functions:
- Program CPLD; Serial Configuration Device for Altera devices; Configure FPGA for Altera devices
- Provides a reliable, fast and low-cost method for in-system programming.
- Supports Cyclone
- Cyclone II
- Cyclone III
- Stratix
- APEX II and APEX 20K
- FLEX
- MAX II
- MAX7000S
- MAX7000A
- MAX7000B
- MAX9000
- MAX9000A
- MAX3000A Serials FPGA or CPLD
- Supports EPCSX, EPCX Series Configuration Devices.
- Supports Quartus II software Version 4.0 or later.
- Supports Quartus II SignalTap® II Logic Analyzer (for logic analysis)
- High Programming Speed with USB interface to Host PC.
- Uses a 10-pin circuit board connector, which is identical to the Altera USB Blaster download cable.
- Downloader is powered by USB port; no external power is required.
Devices Support Details
- FPGA: Cyclone, Stratix, APEX II and APEX 20K, ACEX 1K devices, Mercury devices and FLEX
- CPLD: MAX II, MAX7000S, MAX7000A, MAX7000B, MAX9000, MAX9000A, MAX3000A Serials CPLD
- Configuration devices: EPCS1, EPCS4, EPCS16, EPC1, EPC4 Series Configuration Devices
Package includes the following:
- FCPU-A USB JTAG Downloader for Altera Devices.
- 4-foot high-speed USB cable
- 10-inch flat cable to connect to the target
BUY NOW:
|