XJK Flotation machine / flotator / floatation machine

Working Principle of Floatation Machine:

When the floatation machine works, the impeller Of Floatation Machine is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers of Floatation Machine  and stators should be kept at a distance and should be changed when worn. The bearing in the pump of Floatation Machine should be maintained every three months.

Description of of Floatation Machine:

The flotation machine is the latest design to use the circular tank concept, and combines the benefits of circular cells with the unique features of the minerals mechanism to create the ideal conditions to maximise floatation performance for all roughing, cleaning and scavenging duties.

The machine can be used to separate nonferrous metal, ferrous metal, noble metal, nonmetallic mine, chemical material and recycle mine. It features high inhalation and low power. Each chute can inhale gas, sink magma and separate - there is no need for accessory equipments. It is easy to change the flow chart. The cycling way of magma is very reasonable and it can reduce the impurities to a great extent. There is automatic equipment on the magma surface. The machine is easy to adjust; the upward one makes the magma cycle upward and the downward one makes the magma cycle downward.

Features of Floatation Machine:

1. Large air-absorption capacity
2. Low energy consumption
3. Every cell owns two functions: air absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.
4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.
5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.
6. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.
7. High efficiency
8. High recovery rate
9. Excellent performance
10. Reasonable price

Technical Parameters of Floatation Machine