Titanium

Titanium has multifarious valuable applications due to its low density, high strength, good toughness, durability, excellent corrosion resistance and biological compatibility. It's widely used in aerospace, petrochemical, marine, biomaterial, automobile, prosthetics, and sporting equipment.

We can supply various titanium and its alloy products with different standards, shapes, and compositions as the below:

Titanium plate sheet       Titanium foil strip  
Titanium rod bar           Titanium wire
Titanium tube pipe         Titanium disc ring 
Titanium flange            Titanium nut and bolt
Titanium sputtering target

Featured Titanium Alloys
Ti-6Al-4V (GR5)       
Ti-6Al-4V ELI (Gr23)   
Ti-5Al-2.5Sn (Gr6)    
Ti-0.2Pd (Gr7)           
Ti-3Al-2.5V (GR9)
Ti-15-3-3-3           
Ti-3-8-6-4-4              
Ti-6Al-7Nb
Ti-662     
Ti-6242   
Ti-6246  
Ti-1023  
Ti-1553
Ti/Ni: Shape Memory Alloy
Ti/Nb: for Superconducting applications
Ti/Al: for sputtering target

1. Titanium plate sheet
1) Fabrication: Cold Rolled, Hot Rolled
2) Standards: ASTM B265, AMS, MIL, JIS
3) Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr9, Gr11, Gr12
4) Size available:
Cold rolled: (0.4~4.0mm) x (800~1560mm) x 6000mm max Long
Hot rolled: (4.0~100mm) x (800~2600mm) x 12000mm max Long

2. Titanium foil strip
1) Fabrication: Cold Rolled
2) Standards: ASTM B265, AMS, MIL, JIS
3) Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr9, Gr11, Gr12
4) Size available: (0.02~0.9mm) x (200~1000mm) x L in coil

3. Titanium rod bar
1) Fabrication: Forged, Rolled
2) Standards: ASTM B348, ASTM F136, ASTM F67, AMS, MIL, JIS
3) Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr9, G11, Gr12
4) Size available: Outer Dia. 2.5mm-400mm x 6000mm Long max

4. Titanium wire
1) Standards: ASTM B863, AWS A5.16 ( ERTi1, ERTi2,ERTi5,ERTi5Eli, ERTi7, ERTi9, ERTi11, ERTi12)
2) Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr9, Gr11, Gr12, Gr23
3) Size available: Outer diameter ( 0.1mm~6.0mm) x Length

5. Titanium tube pipe
1) Standards: ASTM B337, ASTM B338, ASTM B861, ASTM B862, ASME
2) Grades: Gr1, Gr2, Gr3, Gr7, Gr9, Gr11, Gr12
3) Size available:
For Cold rolled: OD (3~115mm) x Wall thick (0.2mm~8mm) x 15000mm long max
For Extruded: OD (25mm~210mm) x Wall thick (4.0~30mm) x 15000mm Long max

6. Titanium disc ring
1) Standards: ASTM B265, ASTM B348, ASME, AMS, MIL
2) Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12

7. Titanium flange
1) Standards: ASTM B265, ASTM B348, ASME, AMS, MIL
2) Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12

8. Titanium nut bolt

9. Titanium sputtering target
1) Standards: C.P. Ti, Ti-Al Alloy
2) Shape: round, rectangular, cylinder and others upon your request