The line is mainly used for refrigerator cabinet vacuum thermoforming. It consists of loading station, preheating station, heating station, forming station, cutting station, uploading station, etc.

The modes are available: chain type, clamp type. The line has four working stations and five stations . According to the foaming craft, the line can be available: suction type and bubble type.

The line adopts intelligent temperature controller, servo motor drive, low-temperature air cooler and so on. High automaticity, easy operation, high efficiency, etc.

Max forming area: 2000mmX1000MM

Max forming depth: 650mm

Heating Power: ~303KW

Total Power: ~460KW(380V,50Hz)

Total gas consumption: ~3m³/min(0.5Mpa~0.65Mpa)

Cooling water consumption: ~20m³/h(5℃~15℃)

Forming mode: Male molding(with air pressure)

Cycle time: ≦36s/pcs

Sheet material: ABS, HIPS or PS

Sheet thickness: 2.5mm~6.0mm