1. Anti-static calcium sulphate panel with PVC band edge

 

P-EC anti-static calcium sulphate panel with PVC band edge

Size: 600×600×30mm   600×600×32mm

Structure:

P-EC anti-static calcium sulphate panel consists of high-strength calcium sulphate(calcium silicate or cement particle board) core. HPL or PVC is boned to the top of core and the bottom of the core is bonded with steel sheet. PVC edging strip is glued to be each edge of the panel.

 

Feature:

①. Good loading capacity, strong impact loading capacity and good conductivity.

②. Elaborated made, high dimension accuracy and excellent interchangeability.

③. Good sealing and water-proof.

④. Anti-fire, antisepsis and sound insulation.

⑤. Good decorative effect and comfortable when walking through.

⑥. Environmental friendly and free of pollution.

 

Installation：

Anti-Static Calcium Sulphate Raised Floor finished floor height below 200mm can be installed without stringer. Otherwise, it should be installed with stringer.

 

 

 

 

 

2. Encased calcium sulphate panel with PVC edge trim 

 

              Panel type ：B-EC encased calcium sulphate panel with HPL with PVC edge trim

Size：600×600×28mm

Structure：

B-EC anti-static calcium sulphate panel is encased with galvanized steel sheet as top and bottom, high-strength calcium sulhpate(calcium silicate or cement particle board) as the core material. The otp steel is stuck with HPL or PVC with PVC edge trim inserted.

 

 

 

 

Application：

Anti-Static Calcium Sulphate Raised Floor is widely used in telecommunication room, power station, computer room, factory clean room and other anti-static requiring places.