Double-row 6-hole bath] credit management, advanced equipment, high quality, affordable, professional manufacture and sale of [6-hole bath double row], to provide professional-quality gold double row [6] hole bath, technical expertise, service improvement Please call us for ordering! Technical Phone 021-35304776 Sales Person: Wang Mengxin 18217609127,13817414948 QQ: 1933607632, E-mail: 1933607632@qq.com

New standard dual-row water bath, dual 6-hole water bath, water bath Technical parameters:

Type: Dual 6-hole

Power supply voltage: 220V

Heating power: 1200W

Capacity: 460 * 305 * 100mm

    New standard dual-row water bath, dual 6-hole water bath, water bath structure and working principle: The series bath sink imported high quality stainless steel folding system, welding, stamping off the system shell from the steel plate welding shape. Shell surface using high-intensity electrostatic spraying, smooth solid film. Horizontal stainless steel tube inside the tank heater, placed inside the sink hole of the aluminum shelf. On the cover with a combination of different caliber ring, can adapt to different diameter flask. The left has put water bath, water bath on the right is the electrical box, electrical box on the front panel with temperature control instrumentation, power switch. Electric heating pipe and a sensor box. The temperature control system uses a high-quality electronic components, control Wenling Min, reliable performance, easy to use. How it works: Cu50 sensor temperature will sink into the water resistance, integrated amplifier after amplification, comparison, output control signals, effectively control the electric heating tube, the average heating power, so that the water inside the tank to maintain constant temperature.

New standard dual-row water bath, dual 6-hole water bath, water bath installation and use of equipment

3.1 Equipment should be installed before the water bath placed on a flat bench, first check for the appearance: Appearance should be no damage, the appearance should be a complete instrument, wire insulation should be good, plugs should be intact, the power switch and flexible. Each device's power cord are connected with single-phase three-pole plug, which plugs the top of the grounding electrode is, users must use single-phase three-pole power socket, power outlet on the ground should be very reliable in line.

3.2 power before the first sink into the water bath (Conditional Use distilled water, can reduce the scale), water bath should be watertight after filling with water, liquid should be kept away from the catchy 2-4cm distance, so as not to spill water into the electrical box, damaging the device.

3.3 Analog temperature control instrumentation setup and use: Analog temperature control instrument should first see whether the meter pointer refers to the zero, zero if not, can be so slight mechanical meter zero adjustment screw, so that on the positive available. Depending on the operating temperature, will set the temperature knob on the white flag refers to the appropriate temperature. Red light means stop heating, heating said green light, traffic lights and turn off that light into the time scale of heating or temperature segment. The instrument controls temperature of the maximum 100 ℃, boiling water when needed, can set the temperature knob on the white flag refers to more than 100 ℃ can be.

3.4 digital temperature control instruments set up and use: digital temperature control instruments do not need to zero, as long as the press in turn the dip switch, the DIP switch number that is displayed on the operating temperature to be set.
Red light means stop heating, heating said green light, traffic lights and turn off that light into the time scale of heating or temperature segment. The instrument controls temperature of the maximum 100 ℃, boiling water when needed, can be set to temperature above 100 ℃.

3.5 Use of water bath: turn the power switch, power switch indicator light, the device power is on, temperature control instrument displays the current temperature value is value. According to the required temperature for the temperature setting, temperature control instrument at this time the green light, electric heater starts to heat until the water temperature close to the set temperature, the temperature controller of the traffic lights began to turn light off, temperature control instrumentation into the proportional control band, the heater began to intermittent heating to control thermal inertia. When the water temperature rose to the set temperature, turn lights off according to certain rules off the device into the constant temperature section. For example, the digital display dual-hole thermostatic bath, temperature 65 ℃, its operating procedures are as follows: filling water → → temperature setting on the power switch: press you turn on DIP switch, so that is 5 digit display ten-bit display for six, one hundred shows the temperature controller for the 0 → green light, the heater temperature control instrument to work → alternating bright lights start off, enter the ratio of the heating phase → until the thermostat.
After the end of trial work, turn off the power, cut off power to the equipment and put the net in the water tank.

   New standard dual-row water bath, dual 6-hole water bath, water bath equipment Caution: This product before delivery of the technical indicators are run through the actual test, if you need due process requires the use of self-thermometer ( with a certain accuracy) were measured, the thermometer to the user's subject, if the value of temperature and thermometer instrument display are different, the user can set the temperature knob to do a little fine tuning to meet the technical requirements. Water bath used, the water must be added after the power is strictly prohibited dry. Water bath used to be a reliable ground to ensure safety. Water level below the heating pipes are not allowed to use power, so as not to damage the heating pipes burst. Water level can not be too high to prevent water overflow into the electrical box damaged components. Regularly check the Contact screw is loose, loose, if any should be stepped up solid, the electrical contacts to maintain good contact. Long-term water bath when not in use, should put the net in the water tank and wipe clean, periodically clear the sink in the scale. Bath abnormal phenomena work, timely inspection, maintenance, if not accurately determine the fault contact with our technical department.


    Shanghai Lei Yun test equipment Manufacturing Co., Ltd., Wuhan, latitude, Suzhou, a light, Beijing Bowflex, surveying equipment, clean bench Suzhou, Shanghai Lei Yun agent, excellent service, integrity first, so you satisfied. Sales Person: Wang Mengxin 13817414948 QQ: 1933607632 unified national service telephone :400 -021-7866