V-Wire Screen

V-wire Screen is manufactured with V-shaped profile wire, which is spirally wound around a cage of longitudinal support rods.
Each intersecting point of these wires if fusion welded. The pitch of winding gives different spacing between two adjacent turns of wire.
This spacing gives passage for water to enter.
The entire process is completed on fully computerized machines.

V-Wire Screen Specifications:

• Slot size (mm): 0.10, 0.15, 0.2, 0.25, 0.30-3mm.
• Diameter available: 1.5”, 2”, 3”, 4”, 6”, 8”, 10”, 12”, 14”.
• Open area: up to 60%.
•  Material: low carbon, low carbon galvanized steel (LCG) steel treated with plastic. spraying, stainless steel (304).
• Lengths up to 6 meters.
• Diameter: ranging from 25 to 2000mm.
• End connection: plain beveled ends for butt welding or threaded.

V-Wire Screen Application:
V- Wire Screen is used in a wide range of architectural situations such as floor grates to cover water run off drains in places such as driveways, car parks, shopping centres or malls. They can be constructed to carry pedestrian traffic or much heavier traffic such as fork lifts or standard vehicular traffic.