Name: Interface SCANIA VCI1

Description: 

SCANIA VCI1 is a diagnostic tool to work with older Scania trucks and buses. This tool combined with PC and Scania software can do diagnostics and programming.

VCI1 supports diagnostic systems of Scania trucks and buses of  3 and 4 series. VCI1 works with Scania SD2 and Scania SP2 software. (SD – Scania Diagnos software, SP –Scania Programmer software. )

VCI1 supports all systems on all vehicles made by Scania from 1995 till 2004 if you need a tool to work with newer models check our shop for Scania VCI2 tool. This tool requires PC with RS232 (COM) port, or USB->RS232 adapter.

List of VCI1 supported systems:

• APS – Air processing system;
• BWS – Body work system;
• BCS – Bus chassis system;
• EBS – Brake management system;
• EEC – Exhaust emission control system;
• EMS – Engine management system;
• COO – Coordinator;
• ICL – Instrument cluster;
• TCO – Tachograph system
• ATA, WTA, CTS and AUS – Auxiliary heater system, Clock timer system, Radio;
• OPC and RET – Gearbox management system;
• SMS – Suspension management system;
• RTI – Road traffic information;
• TPM – Tyre Pressure Monitoring;
• LDW – Lane Departure Warning;