Design standard: ASTM D903, GB/T2790/2791/2792, CNS11888, JIS K6854, PSTC7

 

Uses: This machine is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack and fatigue cycling on metals, tape, composites, alloys, rigid plastics and films, elastomers, textiles, paper, board and finished products.

 

Character:

1.      That Using the computer as the main control mathine plus the special testing software of our campany can conduct all of testing parameter, work state, collecting data&analysis, result display and printing output.

2.      Have steady performace, high accuracy, powerful software function and easy operation.

3.      Use the USA high-precision load cell.

 

Specifications:

Capacity choice	1、2、5、10、20、50、100、200、500kg optional
Stroke	650mm(excluding clamp)
Range of speed	50～500mm/min
Effective testing space	120mmMAX
Accuracy	±0.5%
Operation method	Windows operation
Motor	AC motor
Accessories	computer, printer, system operation manual
Optional accessories	stretcher, air clamp
Resolution	1/150，000
Weight	70kg
Dimention	(W×D×H)58×58×125cm
Power	1PH, AC220V, 50/60Hz

 

 

 

Safety Device:

Stroke protection	Upper and lower protection, prevent over preset
Force protection	system setting
Emergency stop device	Handling emergencies

 

Software functions:

1. Use windows working platform, set all parameter with dialog forms and operate easy;

2. Using a single screen operation, do not need to change the screen;

3. Have simplified Chinese, traditional Chinese and English three languages,switch conveniently;

4. Plan test sheet mode freely;

5. Test data can be directly appeared in the screen;

6. Compare multiple curve data through translation or contrast ways;

7.With many units of measurement, the metric system and british system can switch;

8.Have automatic calibration function;

9.Have user-defined test method function

10.Have test data arithmetic analysis function

11. Have the function of automatic magnification, to achieve the most appropriate size of graphics;