Video Ground Loop Isolator could reduce "Ground Loop 
Isolator" with CCTV signals and can easily install in a new 
or added to existing systems. It is useful where a video signal is 
transmitted via cable between points with different ground potentials, 
differences in ground potentials are typically caused by unbalanced power line loads.
 

• BNC male to BNC female with mini cable 25cm on both sides
• Passive, no power required
• Prevents video-signal distortion caused by video ground loops
• Eliminates picture tearing, cross talk and rolling
• Prevents power cables laid by others interfering with the CCTV system
• Built-in TVS (Transient voltage suppressors) for surge protection
• Insertion Loss ：0.5dB 
• Frequency Response： 0-3dB at 10Mhz 
• Input Resistance ：75 ohm 
• Output Resistance： 75 ohm 
• Isolation Voltage ：600VDC (Min) 
• Insulation Resistance ：100m Ohm 
• Dimensions (mm)： 84x28x21 with 25cmx2 cable 69x25x22 
• Material ：ABS Black