W62-CS (formerly 60-22, PL70\PL72) Speed Monitoring System: W62-CS speed monitor is mainly used to monitor the speed of rotating equipment, which can not only monitor the underspeed of the equipment, but also monitor the overspeed and zero speed of the equipment. includes five parts :62- C00 controller, NPN type proximity sensor (or 60-12 type velocimetry sensor), target disc and mounting bracket, shield. detection range is 0~160% of normal speed. Programmable for low speed, overspeed or zero speed alarm The 62- C00 controller is a microprocessor-based intelligent monitor that receives and processes pulse signals from near-sensors representing speed, outputs two-way switching signals, and has two alternative 4~20 mA analog signal outputs. Classification of equipment: W62-CSH-1 single channel speed monitoring system: detection speed range 20-5000 RPM; one DPDT 230VAC/5A relay alarm output (optional NO/NC), non-inductive load; two optional 4~20 corresponding to the corresponding speed of analog signal output; W62-CSH-2 two-channel speed monitoring system: detection speed range 20-5000 RPM; two-way DPDT 230VAC/5A relay alarm output (optional NO/NC), non-inductive load; two-way optional 4~20 corresponding to the corresponding speed of analog signal output; W62-CSL-1 single channel speed monitoring system: detection speed range 1-60 RPM; one way DPDT 230VAC/5A relay alarm output (optional NO/NC), non-inductive load; two optional 4~20 corresponding to the corresponding speed of analog signal output; W62-CSL-2 two-channel speed monitoring system: detection speed range 1-60 RPM; two-way DPDT 230VAC/5A relay alarm output (optional NO/NC), non-inductive load; two-way optional 4~20 corresponding to the corresponding speed of analog signal output; Technical specifications: ◆ voltage :85-250 VAC (50/60 Hz) ◆ operating temperature: electronic devices :-40℃~85℃; sensors :-25,70℃ ◆a. two DPDT 230VAC/5A relay output (optional NO/NC), non-sensory load, b.0-2VDC 0-199% equivalent to reference speed (standard) c.4-20mA output option ,800 EUR maximum load, representing 0-100% or 0-199% of the reference speed, can be selected by software ◆ sensor input: NPN (up to 3 KHz) or dry contact (capacitor can be installed to prevent interference) Note: The minimum value X RPM/60, frequency Hz= pulse number per lap =0.4 ◆ Sensor Working Power Supply :12 VDC ,150mA ◆ enclosure: plastic or metal enclosure, IP65 protective class