This product is suitable for the application to enhanced anti-corrosion of valves and fittings. Epoxy powder coated layer provide a long term protection to the surface covered by more than 250µm thickness of valves and fittings, detected by 3KV electric sparkle, no holidays found. The coating method can be both fluidized bed process and electrostatic spray process, all of them can be realized automated production, an even and continuous surfaces can be achieved both at the interior and exterior of the valves and fittings.

Epoxy powder coating has a very good durability, coated layer adhering to the metal surface which has been shot blasted into good anchor pattern depth, it has very high impact resistant strength and exellent electric insulation. Epoxy resin technology lets metalworks heated to 200℃ to finish production under low energy consumption, automated production.

Coated layer minimum thickness 250µm.

Excellent edge and corner coverage.

Densified coated layer.

Excellent cathodic disbonding property(30days, 23℃).

After dipping in hot water, the adhesive power is excellent.

Very good performance of anti-diffusion against water and oxygen.

Anti-impact strength＞5Nm.

Hardness＞100(EN ISO 2815).

Free heavy metal lead, coated valves and fittings can be used for drinking water.

EPX-11×Series External Fusion Bonded Epoxy Powder Coating is a kind of multi-ingredient resin system appearing in the form of solid mono-component, specially designed for steel pipe single layer anticorrosion. XINLI Company strictly selects all ingredients used for products to assure long term and stable performance as well as to meet all application requirements of the exterior single layer of steel pipe. The product is not only able to withstand extreme climates and environments, but also suitable for the application of critical mechanical stress. All the following environments such as all kinds of earth, permafrost, coalmine boundary, desert, river and lake etc. are within the scope of the product application. Furthermore, the product can be used for long time of temperature －40～100℃. In order to avoid the downtime of users, we provide products of different gel time and curing time.

Formula is the most critical for the production of EPX-11×Series Epoxy Powder Coatings. And all the EPX -11×Series Epoxy Powder Coatings are manufactured by the application of specialized melting-blending technology.

★ Exellent adhesion power, need not primer.

★ The best balance between gel speed and flow speed, the most suitable fusing viscosity to prevent sagging.

★ Fusing layer densification, not easy to form holidays.

★ Fusing layer low penetrativity.

★ Strong resistance to cathode disbonding.

★ The best bending resistance.

★ Strong anti-corrosion of chemicals.

★ Density small.

★ Scuffing resistant during transportation.

★ Long life in harsh environment.

★ Abidance with the Technical Norm of SY/T0315-2005 External Bond Epoxy Coating for Steel Pipe.

★ Abidance with External Fusion Bonded Epoxy Coating for Steel Pipe, Z245.20-26, CAS Standard.

 

1.       Remove the oil, grease and other impurities on the external surface of the steel pipe by suitable means before application.

2.       Preheating the steel pipe to 40-60℃ to drive away moisture before shot blasting.

3.       Shot blast cleaning up to grade Sa21/2 of the GB/T 8923-1988—Rusted and derusted grade of steel material surface before coating, and the anchor pattern depth should be within 40-100µm.

4.       Coating should be conducted within 8 hours after surface pretreatment, while rust reappearance or surface recontamination, the surface pretreatment must be conducted again.

5.       Preheating temperature of the steel pipe should be within 180-250℃, not more than 275℃. 

6.       Powder coating should be sprayed on to the pipe by electrostatic or venturi spray, up to the required thickness.  And curing process should be conducted according to the indicated curing temperature and time. Coating thickness requirements as follows:

 

The product is not flammable and detonable, packed in a carton lined with dual plastic bags, net weight 25kg. Sunshine should be prevented during shipment, while a proper cooling measure should be taken at summer high temperature. The product should be stored in a cool, ventilation, and dry place, and environment temperature below 35℃. Storage quality assurance period is 12 months.

EPX-1200 Series Fusion Bonded Epoxy Powder Coating is a kind of multi-ingredient resin system appearing in the form of solid and mono-component, specially designed for rebar anticorrosion. XINLI Company strictly selects all ingredients used for products to assure long term and stable performance as well as to meet all application requirements of the rebar anticorrosion. We can manufacture powder coatings of various gel time and curing time to meet various customer specific requirements.

Formula is the most critical for the production of EPX-1200 Series Epoxy Powder Coatings. And all the EPX -1200 Series Epoxy Powder Coatings are manufactured by the application of specialized melting-blending technology.

★     Excellent flexibility, exceed coated rebar bending standard.

★     No primer required.

★     Economic.

★     Quick curing and is suitable for quick coating.

★     Adapt to wide range temperature and play protection role.

★     Can not be damaged by concrete infusion.

★     Very strong anti-cathode disbonding performance.

★     Cold flow and softening not appear during storage.

★     Abide by ASTM A775/A 775M, ASTM D3963 and ASTM A884.

★     Abide by JG3042-1997 Epoxy Resin Coated Rebar.

 

1. Rebar should be shot/sand blasted to remove oil, grease, surface loose deposition, its surface quality should be up to grade Sa21/2 of GB8329, and abide by the requirement of JG3042-1997 Appendix A.

2. Preheat the metalworks to 200℃-239℃.

3. Electrostatic spray the epoxy powder to the rebar surface up to required thickness.

4. Powder curing as per requirement.

5. Electro-inspection of holidays should be conducted when coated layer cool down to 121℃.

The product is not flammable and detonable, packed in a carton lined with dual plastic bags, net weight 20kg. Sunshine should be prevented during shipment, while a proper cooling measure should be taken at summer high temperature. The product should be stored in a cool, ventilation, and dry place, and environment temperature below 35℃. Storage quality assurance period is 12 months.