2.Branch ends in intersecting line cutting cylinder ends to meet the branch head of the axis of the eccentric axis and eccentricity of the vertical and non-intersecting, sloping intersection conditions.
3.Cut the pipe end can be inclined cutting face.
4.Can cut the pipe welded on the elbow, "shrimp festival" at both ends of oblique cut surface.
5.Intersects with the circular cutting head to the branch ends intersecting line.
6.Variable angle to cut the groove surface.
7.Can cut the pipe square hole on the waist-shaped hole.
8.Steel can be cut off.
Technical datda:
Diameter of steel pipe |
60mm-600mm |
Cutting length |
6000mm (Can be lengthened as customer's required) |
Effective cutting length |
5000mm |
Drive motor |
Stepper motor |
Plasma power source |
According to the plasma power |
Plasma cutting torch |
1 set |
Automatic ignition |
1 set |
Drive software |
1 set |
Nesting software |
FASTCAM, INTEGNPS,SMARTNEST |
Voltage |
380V/220V 50Hz 1000W |
Cutting speed |
0-3500mm/min |
Moving precision |
0.01mm/step |
Drawing software |
AutoCAD |
Torch height |
230mm |
Speed error |
+-0.05 |
Weight |
4.2T |
Measure |
3.8CBM |