I Code: HGR-1H2500 
II Configuration 
2.1 Single flame cutting head: From domestic 
2.2 Control system: SH-2000H (from domestic) 
2.3 Driving system: AC servo motor, Pansonic, 750W + 200W 
2.4 Driving method: Single side 
2.5 Decelerators: Two sets, NEUGUET from Germany 
2.6 Linear leading rail: ABBA from Taiwang 
2.7 15" LCD 
2.8 Automatic ignite 
2.9 Automatic adjusting height of cutting head 
III Main technical data 
3.1 Length of rail: 8000mm (standard configuration, may be supplied by requirement) 
3.2 Space of rail: 2500mm (other size: 3000mm, 3500mm, 4000mm) 
3.3 Max. Working cutting width: 2100mm (space minus 400mm) 
3.4 Max. Working cutting length: 6000mm (rail length minus 2000mm) 
3.5 Cutting thickness: 5-150mm 
3.6 Max. No-loading speed: More than 6000mm/min 
3.7 Cutting speed: 50-750mm/min 
3.8 Cutting accuracy: +/- 0.2mm (whole stroke) 
3.9 Re-positioning accuracy: +/- 0.2mm 
3.10 Height accuracy: +/- 0.2mm 
3.11 Max raising/droping distance of the cutting torch: 200mm 
3.12 Power supply: 380V, three phase, 50Hz 
3.13 Total power: 2kW 
3.14 Oxygen gas: Pressure for cutting: 7.84x105Pa ~ 8.82x105Pa (supplied by customer) 
Pressure for pre-heating: 3.92x105Pa (supplied by customer) 
3.15 Acetylene: Pressure 0.49x105Pa (supplied by customer)