Product introduction:

Project: a hand drum, ball joint assembly production line

One, the material produced:

1: the fuselage frames using A3 2mm cold plate flanging machine. Production, using a 50 x 40 x 1.5mm rectangular steel pipe welding production, supporting the 38 dia x 600mm galvanized drum, four corner with a universal ball, press 125mm interval division. Foot with galvanized adjustable foot cup.

The 2 transmission mode : the hand drum, a universal ball and tooling plate.

3 tooling plate: selection of delta = 15mm quality plywood production, pavement of 2mm green soft leather, specifications for the 800 * 600 * 17mm. All hold 16 Piece tooling plate.

4: according to prescribed lamp frame using a 40 x 25 x 1.5mm rectangular steel pipe welding production, lighting using 40W single band cover fluorescent lamp holder, 2000 x 50 x 25 x 0.8mm spray line groove, bilateral Shun line configuration.

5 Lights: skirt guard on the lamp frame using 1.5mmA3 cold plate, bent into a 30 x 150 x 30mm shield surrounding edge.

6 two layers: located in the pulling body 500mm, supported by 40 x 40mm angle iron, width of 600mm, choose delta = 12mm high quality plywood production, pavement lake blue fire board.

7 line slot socket: choose 2000 x 50 x 25 x 0.8mm galvanized trough, located in the rack on two sides, each station with a three, two side of the socket, bilateral, Shun line layout.

8 craft card: in the light frame located on opposite sides of two process guidance card rack, adopt H type aluminum rails each production, arrange a piece of A4 transparent organic glass plate.

9: gas pipe in the lamp holder is arranged on the top two pipe air supply group to use, using 4 galvanized pipes production, open a mouth per meter and pl ing head, bilateral Shun line installation.

10 the wind group hook: using 1.5mmA3 cold bending rolling forming, located within the lamp bracket on both sides along the line layout.

11 line body color: the fuselage surface using fruit green spray or customer custom colors.