The Pinch Tube Valve is a compact and cost effective device for dispensing very thin liquids, semi-viscous materials, cyanoacrylates, anaerobics, solvents, UV cure adhesives and two-component fluids. Make repeat dots, beads or potting. The only part of the valve that makes contact with the liquid is the low cost replaceable pinch tube assembly. This makes the FU-1212 valve ideal for aggressive or curable liquids with no risk of the material setting and damaging expensive parts.

Feature:

Disposable pinch tubes minimize maintenance

Designed for low viscosity fluids

Compact and easy to set up and operate

Specification

Part No.: FU-1212

Size: 83mmL*40mm Diameter

Weight: 82g

Wetted Parts: Polyethylene

Viscosity Range: 1-45,000CPS

Min Shot Size: 0.007cc/ml

Flow Rate: 0.54GPM @ 60 psi (water)

Max Fluid Pressure: 60 psi (4 Bar)

Material Inlet: Female Luer Lock

Material Outlet: Male Luer Lock

Mounting: 1/4″20UNC-2B

On/Off Pressure: 50psi (3.4 Bar) Minimum