Pressing Forming Press Group
Is consist of hot press,
cold press and belt conveyor,and mainly used for pressing and forming veneer,
multiple-layer panels and bamboo flooring in order to achieve flat and fine surface.
Overall dimension of press group(L×W×H):12600×2500×2900mm  Approx
A.Main technical data of Hot Press
1. Nominal pressure:2000KN
2. Hot platen specification:2700×1400×42mm
3. Number of Opening:Single layer
4. Daylight opening:150mm
5. Oil cylinder(diameter×stoke):φ160×150mm, 4pcs
6. Hydraulic system rated pressure: 25MPa
7. Heating medium:Hot water or saturation steam
8. Control mode:Automatic+manual
9. Motorpower:5.5kW
10. Net weight:10000KG Approx

B.Main technical data of Cold press
1. Nominal pressure:500KN
2. Hotplatenspecification:2700×1400×42mm
3. Opening:150mm
4. Oil cylinder(diameter×stoke):φ80×150mm, 4pcs
5. Hydraulic system rated pressure: 25MPa
6. Refrigerating device:refrigerating air-conditioner
7. Control mode:automatic + manual
8. Motor power:9.5kW
9. Net weight:9500KG  Approx

C.Main technical data of Belt Conveyor
1. Available width:1400mm
2. Height of working level: 800mm
3. Running speed:8～10m/min
4. Motorpower:1.5kW
5. Net weight:500KG