Technical parameters
Rated voltage：220V/50HZ
Average temperature：8-2.5W/dm2
Sticking strength：0.5kg/cm2
Features:
Product thin: 0.4mm thickness, the product both lightweight and ensure its strength, can be reused.
Use security: set fog mirror, waterproof mirror, security mirror and one, the working environment without tidal state leakage phenomenon.
A variety of shapes: square, round, oval and other diversity. Objective existence of plasticity, can help achieve your artistic design.
Easy installation: the whole anti-fog plastic film surface to the synthesis of anti-fog mirror easier, more convenient installation.
| Anti-fog film, fog mirror installation diagram | 1. The anti-fog film paste back in the mirror
Anti-fog film installation method is very simple, you just need a towel, or a rubber roller and the like can easily be attached to the lens anti-fog film made of an anti-fog mirror. Protection anti-fog film side of the White full gum, which makes installation simple applicator is very strong.
2. Select the size of the appropriate anti-fog film
If you choose the lens anti-fog film and selected as an oval or circular, and its size is the same. Will be attached to the lens anti-fog film, the excess part of the CKC with art on it. Note that when the applicator to the edge of anti-fog film and align the edge of the lens, removal of anti-fog film can not damage the heating element.Although the heating element placed in the middle of two layers of membrane, but it is clearly visible, very easy to identify, so the operation is easy.
3. Power Connector
1m power cord with anti-fog film, there is no difference between positive and negative, as long as the anti-fog film's power cord connected with the supply line can be, and the node processing line with the general electrical insulation work standard4.
Install Mirror
With anti-fog mirror film installation with the installation of the mirror as normal no special requirements, specific methods please consult your local glass supplier.
5. Terminal box position
For the decoration aesthetic considerations, please enter the power junction box placed in the appropriate place to install anti-fog film, so the power cord Buzhi Yu exposed affect the decoration. Of course, can use a socket and power connector.
6. Control
Anti-fog film can be used alone to control a switch, but also with mirror front lamps, or sharing a switch to control the exhaust fan. As long as the latter when using the switch connected to power, anti-fog film to start working.
| |
| | | | |
|
