Introduction

Thank you for purchasing a DYLINK CAT5 DVI Extender. The DYLINK EX101D DVI CAT-5 Extender transmits digital DVI video up to 50 meters away from a DVI source using single CAT5/5e/6 cables. Each video extender consists of a local unit that connects to a DVI source, and a remote unit that connects to a monitor.

Package includes

■ Local Unit EX101D-L

■ Remote Unit EX101D-R

■DVI A-A 1x1.5m cable

■ 2 x Power Adapters

Features

•Extends any DVI compliant device up to 50 meters from the computer Uses single CAT-5/5e/6 cable
•Supports VESA Standard resolutions and HDTV resolution,High quality video resolution of up to 1920 x 1200 @60Hz /1080p
•Supports DDWG standard for DVI compliant monitors
•Supports system restart
•Improved compensation for cable skew

Specifications

Installation

1. Turn off the source PC and the intended display.

2. Position the EX101D Remote Unit near the intended display. Similarly, position the Local Unit near the computer. Please note that both units will require a power

connection, so please ensure that each unit is situated near an available power outlet.

3.  Connect the source PC to the “DVI In” port on ，the rear panel of the local unit,  using a DVI male/male cable.

4. Connect the intended display to the “DVI Out” port located on the rear panel of the Remote Unit, using a DVI male/male cable.
5. Connect the Local Unit to the Remote Unit, using standard CAT5 cable (terminated at both ends with an RJ45 connector).
6. Connect the power adapters (provided) to both Local and Remote Units.
7. Turn on the PC and monitor.