Using the Taiwan Syntec controlling system with high performance, high quality and better maintenance It can control the 3D-processing which process, engrave and cut quickly and smoothly.
Software has good compatibility and is compatible with several design software such as type 3/Actcam/CAD/CAM.
Vac-sorb table that made of eletricity-wood has high adsorbability, which can strong adsorb different areasmaterial, high density, not change shape.
Using automatic oiling-lubrication system, which can be controlled by a button. It is easy to use and maintain.
Adopt Japanese Yeskawa servo drive system with large power. Y axis uses double-motor drive. The running speed can reach to 60m/min above when no material are processing.
Using imported transducer and servo-drive and motor imported from Japan, the electric parts of Siemens.
Using precise automatic fixing knives system make the operation more quickly that increase the efficiency.
Table area |
1440*3040mm |
Work travel |
1300*2500mm |
Feed-in height |
200mm |
Resolution ratio |
0.025mm |
Spindle power |
9KWItalyHSD |
Work voltage |
AC380V/50Hz |
Operating speed |
60m/min |
Spindle rotating speed |
6000-18000rpm/min |
Cutter diameter |
3.175 4 6 12.7 |
Command code |
G code.uoo.mmg.plt |
Adsorb power |
5.5KW |
Cutter control pressure |
0.7Kpa |
Work mode |
AC servo |