Product Description

I. Brief introduction:

MSR43 serial products are manual swipe card reader, adopting high integrated magnetic card decoding chip.They have small electricity consumption and strong interference resistance.They comply with ISO-78117812magnetic card decoding standard completely to decode data in each track into RDP,RCP and CLS signal foroutput. Exquisite magnetic installation structure and precise track position makes card reading MOre stable andreliable, which is our patented technology.

 

II. Applications

Magnetic stripe card reader.

POS Keyboard.

Security Control.

CAT(card authorization terminal ).

 

III. MOdel No..

 

IV. Technical Feature: 

1) Adopting arm suspension type magnetic head assembly method enables machine with softelasticity and good hand feel. Elasticity will not change in 10,000,000 times, which greatlyincreases life span of magnetic head.

 

2) Installing magnetic head in the magnetic head box makes track position of magnetic head MOreprecise to ensure success card reading rate, and appearance of product looks MOre beautiful.

 

3) Specific integrated circuits guarantee AMP 15% of the card can work properly.Dual-track static current of the whole machine is below 4mA/5V.Strong interference resistance.

 

4) Precise electric circuit disposition can read high-co magnetic card at 4000Oe completely.

 

5) Magnetic head adopts platinum manganese alloy material, which makes it life span over 800,000times

 

V. Work Environment: 

Subject	Specification
Work temperature and humidity	0 - 60C, 20 - 90% RH
Storage temperature and humidity	-30 to 70C , less than 95% RH
Vibration	Amplitude 2mm , 2 G , 10-55Hz/min in x,y,z direction
Impact resistance	UP TO 30 G,11 msec

 

VI. Technical data and Specification

6.1 DimensiDimension and weight

Length(mm)	Width(mm)	Height	Weight(g)
43	16	22.5	45

6.2 Specification

Track Standard	Comply with ISO7811standard
Decoding method	F2F (FM)
Card reading Density	210 BPI	75 BPI	210 BPI
Card reading Data bit	1 track 79	Characters(7-bit) (7- bit)	3 track 107 characters(5-bit)
Card thickness	0.2~0.84 mm
Suitable Voltage Static current	DC2.7V~DC5.5V 4mA/5V
Output ripple voltage	Less than 50mVp-p
Track reading width	1.5mm
Operation speed	15 - 120 cm/sec (6-50inch/sec)
Magnetic head life span	Over 800,000 times
Error rate	Lower than 0.5%
Insulation resistance	10M
Interface	TTL