Application:

Rod Mill is mainly used in processing and crushing the feldspar ,quartz and ore.

It also used in making kinds of hard and soft materials like the grinding materials ,fire-proof materials ,cement ,steel grit ,cinder powder ,copper mineral ,iron mineral ,ore sand ,aggregate, pitch aggregate and so on ,especially being efficient on cobble sand making .It is the most energy-saving equipment of crushing and sand making in the international world .Compared with the traditional ones ,it can saving 60%.

Working Principles:

Rod Mill is moving in low speed through the motor by the reducer and big gear wheal around .Or the barrel rotates driven by the low-speed motor through the big gear wheal around .The steel bar in the barrel is lifted to a certain height under the impact of centrifugal force and friction and then falls into a state .The materials enters into the barrel continuously and are crushed by the moving steel bar .Products are discharged from the sand maker by the force of flowing and feeding .

Characteristics :

a. The particle size is epigranular and that can be changed according to the need of product.

b. The machine has a high adaptability, and it can crush various materials with large capacity of production, low emery dust and high quality final products.

c. Instead of sliding bearing surface, the roll-bearing surface is applied to the machine to lower the power and improve the producing capability.

Technical Parameters: