1. Infrared rays

1.  The spectral range of the infrared ray is between 0.8um and 3.0um. The output power can be selected by turning the button up or down (Any steps amongst Range 1-12 may be selected. Each step represents a corresponding power, with Step 1 the lowest and Step 12 the highest). The numbers represents the intensity.

2. Maximum output of light power 20W±5W.

3. The infrared ray radiation duration can be set up automatically (Two modes).

4. Treatment mode

  1) Radiating duration: 1s-9s. Step pitch: 1s. Error: 0.9s.

  2) Interval: 1s-9s. Step pitch: 1s .Error: 0.9s.

Times of circulation: 1 to 9.

5. Physical therapy mode: The time should be set up between 1min and 99min. Step diameter：1 min.

6. Light conducting rod

  The light conducting rod is made of quartz glass and consists of three types (Based on its structure).

2. High-frequency Electric Scorching

1.       Frequency: 0.2MHz-5MHz. One or more frequencies. Working frequency error: + -10%.

2.       Output power<= 50W.

3.       The power can be selected by turning up/down the button. (Any step from 1 to 6 can be selected). The power will be displayed in numbers.

4.       The pedal switch is dripping-proof. Starting power: 10-30N.

5. The electrode treatment tip consists of pointed type, knife type and round type.

3. Millimeter Wave

1.       Millimeter wave radiator: It consists of a resonance cavity, a bulk effect diode, an euphoric cover, and a light-emitting diode.

2.       Frequency range: 37.5GHz+-10GHz

3.       Radiation power: 70mw+-40mw.

4.       Treatment duration can be set up between 0 and 99 min by turning up or down the button on the computer. And the step length can be set up at 1min.

5.       The mobile arm on the radiator bracket has a range of extension and retraction. (>=600 mm)

The millimeter wave radiator can be categorized into three different sizes based on its application.

4. Indicator

1. Means of display: Digital tubes and light-emitting diodes.

2. Displayed contents: a) The digital tube displays steps，circulation times, intervals, and operation duration.

                   b) The light-emitting diode displays power supply and functions (infrared, high-frequency or millimeter wave)

                   c) The value of the step numbers represents the value of output power of the high-frequency electric scorching. (Step One: Weakest. Step Six: Strongest)

3. Digits of display and specification classification: 2 digits. (For power, circulation times, intervals and operation duration)

5. Special Features

1. I t is small in size and compact in structure.

2. Versatility in use: It can be used for radiation treatment, high-frequency electric scorching treatment, millimeter wave treatment or other treatments, based on the nature of the diseases.

3. The amount of treatment energy can be accurately controlled through the 12 steps of infrared radiation rays.

4. The push-button handle switch is used to control or stop the operation process. When a circulating radiation needs to be continued, press the button again.

5. The newly-developed millimeter wave and infrared ray physical therapy can help improve treatment effects.

6. The parameters can be stored.