HDBaseT 5 Play
P/N:CEHEDE102

The Extender is based on the HDBaseT technology. It extends your HD display with the resolution of 1080p/60Hz up to 330 feet (100 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable.
It can also extend the Ethernet, IR, RS232 signals by using the same Cat5e/6 cable at the time.
Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.
It also provides POE function that you only need to provide a piece of 48V/1A DC power adapter at the end of the Sender to supply the power for both the end of the Sender and Receiver.

Features:
1.  Supports HDCP
2.  Supports POE
3.  Supports uncompressed HDMI signal.
4.  Enables HDMI 10.2Gbps over a single 100m Cat5e/6 cable.
5.  Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
6.  Supports 1080p@60Hz@48bit pixels.
7.  Supports 3D pass-through.
8.  Supports CEC pass-through.
9.  Supports uncompressed audio such as LPCM.
10. Supports compressed audio such as DTS Digital, Dolby Digital（including DTS-HD and Dolby  True HD）.
11. Supports Ethernet transmission at the time.
12. Supports RS232 signal bypass.
13. Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR   commands received in the vicinity of the Display back to the Source devices.
14. CAT5e/6 cable follows the standard of IEEE-568B.