Good service for PCB assembly .also provide the testing service.

 a)Being a PCB producer, we always have a very close relationship with the design

b)As a result, we are in a very good position in supplying not only just PCB , but also assembly the whole product for you

c)Instead of sourcing separate producer for PCB and assembly, it is better to choose a manufacturer that can do both things.

d)We always do our best price best quality and best service in PCB and PCBA for you.

excellent and high quality control

prompt delivery

small order acceptable

perfect craft procedure

customer's designs are welcome

PCB Process Capability

·     processing layers:1-28 layers

·     Finished thickness (thinnest - the thickest): 0.008 "~ 0.24" (0.20mm ~ 6.0mm)

·     Minimum aperture: 6mil (0.15mm)

·     Minimum line width / spacing :3-4 mil (0.076-0.10mm)

·     Maximum board size: Single & Double 22 "x 43" (550 x1100mm), Multi-layer 22 "x 25" (550mm x 640mm)

·     Impedance Control: ± 10%

·     Surface Treatment: OSP,  HASL, Electric Nickel / Gold, Chemical nickel / gold, lead-free HASL , Gold finger, immersion Silver, Immersion Tin.

·     Base materials: FR4 ( ShengYi, KB, International), high TG (TG150, TG170), halogen-free board (Halogen-free), high frequency plate (Rogers, Teflon, Taconic), made PTFE (PTFE) ,, AL aluminum plate (Berquist, Al-made basis), copper (Cu Base), Iron (Fe Base), ceramic substrate (Ceramic Base)

FPC Process Capability

·     processing layers:1-6 layers

·     Finished thickness (thinnest): 3mil (0.08mm)

·     Minimum aperture: 4mil (0.10mm)

·     Minimum line width / spacing: 2 mil (0.05mm)

·     Maximum board size: 10 "x 45" (250x 1200mm)

·     Surface Treatment: OSP,  HASL, Electric Nickel / Gold, , Chemical nickel / gold, lead-free HASL, Immersion Gold

·     Insulation resistance: ± 1011Ω (Normal Normal

·     Thermal shock resistance: 260 °C 10 sec.

·     Processing materials: polyimide (PI), polyester (PET), polyimide (PI) + FR4

Quote requirement:

1)Gerber file and Bom list

2)Clear pictures of pcb/ fpc/ pcba or pcba sample for us

3)The PCB specification: Copper thickness(18um or 35um?); Finished board thickness(0.8mm or 1.6mm?); Surface treatment(lead-free HASL or immersion gold?)

4)Test method for PCB/PCBA

PS:If you have not Gerber file,plz sent the 1~2 pieces pcb/pcba samples to us,if your pcb have any special demand, pls note clearly in your enquiry,this is necessary. Only this we can quote to you at first time.

 Website:www.sunsoartech.com
Contact:Ms Sabrina(skype:sunsoar2)