◆ CR-PGMII bases on the up to 210MHz, 32-bit embedded processor. Internal 8M SDRAM and 2M flash allow it execute intricate calculation of logic instruction in high speed.
◆ Provide customer with a open programmable control platform, personalized operation interface and mutual control structure.
◆ Powerful programmable embedded interfaces make it has a capability to control almost the third party devices.
◆ Users can build their IR code bank which supports logical controls such as one key for 3 IR codes, or download the latest one from CREATOR website conveniently.
◆ CR-PGMII supports 3 CR-NET control buses, which could be expanded up to 256 control modules, e.g. touch panels, dimmers, power controllers’ volume controller and matrix switchers.
◆ Ethernet control can be achieved by connecting it to the LAN with expansion card.
◆ Embedded IR learning function.
Processor:
CPU: 32bit Samsung ARM processor
Speed: 210MIPS
Memory:
Standard Memory: 8M SDRAM and 2M Flash
Control Ports:
COM Ports: 8 DB9 male ports of bidirectional RS232, RS485 and RS422
IR Ports: 8 terminal module , 16 pin output .
I/O Ports: 8 terminal blocks with protective circuit rated for 0-5V digital input
CR-Net Ports: 3 terminal blocks of CR-Net bus
Embedded IR learning function
Network expansion ports: 1 RJ11 6PIN port for expanding XPORT or WIPORT
Low voltage relay ports: 8 terminal blocks, 16 Pins, normally open contact relay, rated current/voltage AC0.3A/125V,DC0.3A/110V,DC1A/30V
Expansion slot: 2 expansion slots, support all kinds of expansion cards
Computer management ports:
1 MINI USB1.1 (compatible USB2.0) port, on front panel
1 MINI USB1.1 (compatible USB2.0) port, and 1 DB9 female port, on rear panel
Power Supply:
Universal international power supply (AC100V-240V)
Software:
Control System Builder
Dimension:
485L x 236W x 89H (mm)
Weight: 2.8kg