HDPE Bottle Extruding Machine
2,Max.bottle:6L

 Clamping system: Fixed two-way translation module structure
Extruding system: hard gear box + Delta inverter
Die system: Storage die
Hydraulic system: Yuken hydraulic valve / oil pump + electric hydraulic proportion control
Circuit system: Mitsubishi PLC + man - and - computer interface + Temperature - controlled module

Main technical parameter:

 

Max.Product Volume	(L)	6
Dry Cycle	(PC/h)	1200
Screw Diameter	(mm)	60
Screw L/D ratio	(L/D)	24-30
Screw drive power	(KW)	15-18.5
Srew heating capacity	(KW)	10.8-12
Output of HDPE	(kg/h)	60-68
Oil pump drive power	(KW)	5.5
Clamping force	(KN)	68
Platen distance	(mm)	178-535
Max.Die diameter	(mm)	150
Central distance of bi-die	(mm)	130-200
Max.Die diameter (Bi-die)	(mm)	100
Central distance of three-die	(mm)	100-120
Max.Die diameter (Three-die)	(mm)	60
Central distance of four-die	(mm)	60-85
Max.Die diameter (four-die)	(mm)	30
The Average Consumption	(kw/h)	16.5
Blowing pressure	(Mpa)	0.6
Air volume	(M3/MIN)	0.5
Cooling water pressure	(Mpa)	0.2-0.3
Water consumption	(L/MIN)	50
Size of machine	(L*M*H)/m	3.0*1.9*2.5
Weight of machine	(TON)	4.5