Ultrasonic water depth detector ---HLU-SF

Model:	-
Brand:	HOLYKELL
Origin:	-
Category:	Electronics & Electricity / Transducer
Label:	-
Price:	-
Min. Order:	-

Product Description

Technical parameters (Models not with the below parameter could be customized)

---Maximum Range: 5 ~ 500m

---Detection accuracy: ± 0.5% (20 ℃ water standards based on plane)

---Blind spot detection: ≤ 5% ~ 2% F.S (atF0 ~ FS)

---Wave beam angle: 18 ± 2

---Operating frequency: 50 kHz ~ 200 kHz (based on matching sensor dependent)

---Output signal: RS485, 4 ~ 20mA

---Instrument operating parameters:

---Display: LCD multi-information display + backlight, depth four-digit

---Display resolution: d = 1mm/1cm (user settings)

---Keyboard: five touch of a button

---Operating temperature: 0 ℃ ~ 50 ℃; Storage temperature: - 20 ℃ ~ 70 ℃

---Humidity: ≤ 80% RH non-condensing (meters)

---Storage humidity: ≤ 70% RH non-condensing (meters)

---Dimensions: 235 × 115 × 70mm

---Operating voltage: Built-in rechargeable lithium battery, standby time of about 6 hours intermittent

---Sensor operating parameters:

---Application of media: fresh water, sea water (determined when ordering); Operating temperature: 0 ℃ ~ 40 ℃

---Draft depth: ≥ 500mm

---Sensor lead: 10m

---Protection level: IP68

---Weight: Net weight ≤ 2.5Kg, packaging gross weight ≤ 3Kg

---Packing size: 27 × 12.5 × 21Cm

---Installation: Portable hand-held instrument; 1 inch threaded sensor installation.

---Dedicated charger: Input voltage: 110 ~ 240VAC 50/60Hz

---Output voltage: 12.6VDC 350mA

The standard instrument configuration: 1. Sensor 2 hand-held instrument 3. Dedicated charger

Can be selected a variety of portable protective case when you ordering.