DPP-250M Flat-plate paper(Al)/plastic packaging machine is our scientific research personnel develop from the original DPP-250F standard model, based on market feedback combined with the development of a new machine.DPP-250M compared with the original type, it has the advantage of widther packaging area, deeper forming, bigger traction length; we use the frequency control, servo traction to pull the film and also the imported PLC control, touch screen interface. It is widely used for packing daily necessities, electronic parts, stationery and other similar shaped solid articles with paper and plastic(PVC) blister. This machine can finish the following actions automatically: Plastic(PVC) blister forming, seal the card and blister, cut the waste edge and rolling collect the excess material..
Characteristics
1.Compact configuration, calm run, easy manipulation and convenient maintenance;
2.Steplessly variable frequency sped regulating, PC circuit control panel (can be equipped with touch screen);
3.Adjustable travel, mould spout location, convenient for changing moulds;
4.Adopt manipulator grip, has accurate synchronization;
5.With cylinder heat-sealing, the upper and lower checkers ensure the effect of heat-sealing;
6.Can design any mould and feeder according to customer's requirement.
Features
1.The appearance of the whole machine adopt stainless steel.
2.Frequency conversion speed control is available.
3.Adjustable travel range.
4.Emergency stop device
5. Human-machine interface, touch screen control system, easy and convenient to operate.
Main Technical Parameter
Punching Frequency
|
20time/min
|
Max Forming Depth
|
210mm
|
Max Forming Depth
|
38mm
|
Max Forming Area
|
240x210mm
|
Total Power
|
380V 50Hz 9Kw
|
Specification Of Packing Material
|
250x0.25(0.15~0.50mm)
|
Specification of Packing Material
|
250x0.02mm
|
Air-compressor
|
More Than 0.22m3/min
|
Pressure
|
0.5~0.7Mpa
|
Machinery Dimension
|
5300x840x1670mm
|
Weight
|
2500Kg
|