Product Description
TBL5048XYCF series armor cash in transit vehicle is modified on the basis of Ford JX1049DL chassis by excellent modelling technology, production technology Strictly according to the GA164-2005 A level standard of the Ministry of Public Security. Equip turbocharged intercooler diesel engine on the model, is suitable for any climate environment and geographical environment.
1. Closely bulletproof for driving cabin and escort cabin: Use Baolong’s unique using heat treatment equipment and technology, decorated with bulletproof steel in all uneven places of the pillar and FR panel and others, realize real bulletproof. Using bulletproof steel and bulletproof glass with the most thin and nice performance bulletproof, through the precise joint arrangement and clever design installation, can reduce the modified weight increase, and improve the bearing capacity of the vehicle.
2. All around rigorous bulletproof for important parts: Engine compartment, radiator, battery, fuel tank and other important parts, all decorate bulletproof steel around them for protection.
3. The front door to strengthen: Make reasonable strengthen in the A pillar and installation hinge parts of the front door, prevent flagging phenomenon of the door because increased weight.
4. Modified middle door: Modify the sliding door to turning door, and use high strength hinge to eliminate derailment phenomenon of the sliding middle door after made of armored.
5. The door locator: Install the V load bearing type door locator between the pillar and the door, to bear the large power vibration produced with shaken up and down of the door, and to avoid the easy damage with excessive standunderload of the door lock system, also can prevent vibration and sank for weight gain of the door. Baolong company in the first has rolled out the door positioning technologies in domestic industry in 1998.
6. Elevating shooting holes: Make the elevating shooting holes on the front door, it is convenient for documents transfer and ventilation, and make outside push type round shooting holes on the door of escort cabin.
7. Crashproof bumper: Install strength FR/RR crashproof bumper with same color of car body on the vehicle. Decorate bulletproof and ventilative grille on the middle place for radiator on FR bumper, and decorate anti-skid pedal on the middle place of the RR bumper, and install reverse radar searching unit on it.
8. Monitor: Monitor with double camera and the best suspension color LCD screen at present . Two cameras is installed on front upper part inside and on upper part outside of RR door of the cash cabin, and decorate waterproof cover for the camera outside of the RR door. There are manual switching key on the display screen, can choose to monitor situation inside of the cashcabin and the back road conditions of the vehicle, and that can automatically switch to rearview state. Hanging type display screen is installed on the position of rearview mirror in cabin of the original car, and replace the original rearview mirror, this is not only satisfied driving habits for driver to see the rearview mirror, and can avoid sun exposure and prolong the service life of the display screen. In the monitor host, reserve video collection output and input interface, can satisfy the video, play and wireless transmission needs.
9. Alarm: Install alarm host in instrument desk, position reasonable and easy to use.
10. Skylight: Install skylight on the roof of the escort cabin for aeration and escape. The skylight type is optional.
11. Rear air condition: Install Ford original air condition in escort cabin.
12. Extending water flow sink: Since the water flow sink on both sides of original Ford roof are stop to A pillar above of the front door, when open the door in rainy day, the water in the flow sink will flow to the inside of the car. In order to make up for the defect of the Ford car, Baolong company has extended the water flow sink to the front of rearview mirror, eliminate the dripping phenomenon.
13. Seats: All leather seats.
14. Interior of escort cabin: Develop mould for the interior trim of the body newly, and combination to diecast the interior trim of the body by most upscale interior fabrics, organic polymer compound heat insulation materials and light metal material. not only ensure the interior trim to meet the original cars, and have a more excellent function of heat insulation, effectively protect the refrigeration effect of the air condition.
15. Prevention of burglary and riot for cash cabin: Use high strength steel to decortate the FR/RR door of the cash cabin and install more pin& three-way anti-theft lock common controlled by double anti-theft lock on RR door fo the cash cabin, whole inner insert type doorway of the side door hinges, after locked, can not take down the door even dismantle the door hinge from outside, the security is very solid. Gear meshing sliding type of opening door, light operation and smooth glide.
16. Interior of cash cabin: Decorate silver pattern alloy plates around, fire prevention cloth roof, pattern steel plate for floor.
17. Lighting of cash cabin: Assembly white LED dome light on the cash cabin, its characteristic is strong brightness, save electricity, long service life.
Standard equipmentMain parameter
Central door lock
Air condition
Vehicle-mounted fire extinguisher
Hanging type double lens LCD monitors
Hung sliding type for the front door of cash cabin
Elevator shooting (delivery) hole on the front door
Dual lock and three pin type for lock of cash cabin
Waterproof dustproof device for the door lock institutions of cash cabin
Power steering
Escape window
Vehicle-mounted alarm
Elevator shooting (delivery) hole on the door of escort cabin
Hold out shooting (delivery) hole on the door of escort cabin
Pressure relief devices for the door of cash cabin
LED lamp for cash cabin
Pattern steel floor for cash cabin
Rear top brake lamp
Extend water flow on the front door
Front and rear bumper
|
Model:
|
TBL5048XYCF
|
TBL5048XYCF2
|
|
Chassis model:
|
JX1049DL2
|
JX1049DLB2
|
|
Engine model:
|
JX493ZLQ3
|
JX493ZLQ4
|
|
Displacement(cc):
|
2771
|
|
Emission:
|
Euro III
|
Euro IV
|
|
Max. power(kw/rpm):
|
85/3600
|
80/3600
|
|
Max. torque(N.m/rpm):
|
285/2000
|
|
Driving type:
|
4×2
|
|
Max. speed(km/h):
|
≥110
|
|
Overall dimensions (L*W*H)(mm):
|
5995×2096×2350
|
5995×2096×2270
|
|
Cash cabin capacity (m3):
|
5.5—6.0(Depends on client's need)
|
|
Seats(person):
|
6
|
|
Gross vehicle weight (kg):
|
4000
|
|
Curb weight (kg):
|
2600
|
2800
|
|
Payload (kg):
|
1400
|
1200
|
|
Wheelbase(mm):
|
3570
|
|
Suspension(FR/RR)(mm):
|
1070/1355
|
|
Tread(FR/RR)(mm):
|
1700/1645
|
|
Tyer:
|
185R15LT（8PR）
|
|
Tyer number
|
6(double rear tyers)
|
|
Min. ground clearance(mm):
|
165
|
|
Fuel tank(L):
|
68
|
|
Protection level:
|
GA164-2005 Class A
|
Product Image
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
