Anti-corrosion epoxy glue
The product uses imported epoxy resin and modified curing agent. The product has a high reactivity, fast curing, curing at low temperature, humid environment. Conferred curing was good physical and mechanical properties. For the preparation of adhesives, sealants, coatings, anti-corrosion, casting, and laminated materials. Can be used as adhesives, anti-corrosion chemical industry, civil construction, paint and fiberglass industry.
Project LD-205A LD-205B
Appearance off-white viscous liquid brown transparent liquid
Density (g / mL) ≤ 1.4-1.6 0.9-1.1
Viscosity (mPa • s) ≤ 12000-15000 5000
Packing 25KG / drum 6.25KG / plastic drum
Ratio of 4 1
Instructions for use:
(1) Weigh 4 parts by weight 205A
2 1 parts by weight of the weighed 205B
3, the weighing good 205A and 205B are placed into a container, stir (stirring with an electric drill,
Stir well, otherwise it will cause is not cured or not completely cured). Drill stirring for 5 minutes, artificial
Stirred for at least 10 minutes.
4. Mixed AB material surface can be painted on the component.
5. 8 hours curing temperature at 25 degrees. If the temperature is below 20 degrees, causes the curing time becomes long.
Packaging, transportation and storage:
During transport should rain, sun, prevent moisture from damaged packaging and stored in a cool, dry conditions, away from sources of ignition, strong acids, strong bases and strong oxidizing agents, meet the standard requirements of the transportation, storage conditions, since the date of production storage period of 12 months. Stored color gradient deep is a normal phenomenon, not affect the results.
