Model: | AUTO-103 |
---|---|
Brand: | AUTO |
Origin: | Made In China |
Category: | Electronics & Electricity / Electronic Instrument / Laboratory Instrument |
Label: | Spring operated impa , spring impact hammer , Calibration Impact H |
Price: |
US $380
/ pc
|
Min. Order: | 1 pc |
Last Online:29 Jun, 2013 |
1.Introduction:
IEC60068-2-75 Spring Impact Hammer is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.
After applying the impact with the hammer, the products is examined with accessibility probes to determine access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/UL/CSA
and other standards.
2.Application:
Adjust the impact severity by rotating the knurled cap until the desired energy-value is displayed. Pull the knob slowly out of the device until it locks in place.
If moved too fast, the clamp may skip its arrester and will lock at its way back
when the pulling-force declines.
Hold the device horizontally at it’s housing tube and press the (black) release cone to the specimens plane of impact. The strike is automatically released when the release force threshold is reached.
3.Types:
Spring Operated Impact Hammer | energy | Tolerance error |
0.14J | ±0.014J | |
0.20J | ±0.02J | |
0.35J | ±0.03J | |
0.50J | ±0.04J | |
0.70J | ±0.05J | |
1.00J | ±0.05J | |
2.00J | ±0.10J |
Auto-103 | Single spring hammer | 0.14J,0.20J,0.35J,0.50J,0.70J,1.0JSelection |
Auto-102 | 2J Spring Hammer | 2.0J |
Auto-106A | Universal Spring Hammer | 0.14J,0.20J,0.35J,0.50J,0.70J,1.0JSelection |
Auto-106B | Universal Spring Hammer | 0.14J,0.20J,0.35J,0.50J,0.70J,1.0JSelection |
Material | Stainless steel | |
Reference | IEC60068-2-75 IEC884 and UL1244 |