Infusion Pump with bolus function
Product Description
Main Features for LC-1002 Infusion Pump:
1.with bolus rate
2.Available for most brand of I.V sets after an easy calibration
3.with internal battery which can be disassembled for easier transportation.
4.the flow rare in ml/h and drop/min can convert automatically.
5.Double MPU in work to ensure system security
6.With intelligent interface on back panel,can update unit software & connect to nurse call jack
7.Ultrasound detection of air and selectable drop sensor can make the infusion safer.
Detailed spec.
| Model No. |
LC-1002 |
| Flow Rate |
1.0～800ml/h(0.1 ml/h step 100～800ml/h) |
| Bolus Rate |
600～800 ml/h(default value is 600ml/h) |
| Volume Limit |
1-9999ml |
| Applicable IV sets |
Comply with all brands after calibration |
| Accuracy |
±5% |
| Bubble sensitivity |
Detestability of air bubble ≥40uL |
| Occlusion alarm pressure |
100Kpa±20KPa |
| Alarming |
Air Bubble,Occlusion,Door Open,Complete infusion, Low power,Motor failure,Drop abnormal,Low temprature,Pause overtime,Electrical circuit jam,Error set of accuracy,Air detect circuit error,Motor control error,battery exhausted |
| Drop Sensor |
Selectable |
| KVO rate |
KVO rate as at 1 ml/h with flow rate no higher than 10 ml/h; as at 3 ml/h with flow rate higher than 10 ml/h |
| Internal Battery |
Fully charged 6 hours,the internal DC 12V Ni-MH battery can continously run over 4 hours at average rate level. |
| Power |
100-240V AC 50/60 Hz |
| Power consumption |
18VA |
| Working enviroment |
Operation Temperature |
5℃-40℃ |
| Atmospheric Pressure |
700hPa-1060hPa |
| Ralative Humidity |
20%-90% |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
