Model: | TPM001 |
---|---|
Brand: | yantorle |
Origin: | Made In China |
Category: | Security & Protection / Access Control System |
Label: | flap barrier , nice flap barrier , turnstiles |
Price: |
¥36800
/ SET
|
Min. Order: | 1 SET |
Last Online:23 Nov, 2013 |
1.Directions:
Intelligent translation flap barrier (high flap barrier) is a intelligent channel management equipment produced by the Yantorle
Company, on basis of many years of development and research, which is high-tech product mainly used for intelligent
management of personnel access. The device integrates mechanical, electronic, microprocessor control and various
identification techniques closely, and it is capable of intelligently control and manage personnel access, by connecting
with various identification system equipment and adopting reliable security protection devices, alarm devices, direction
indicators, and user-friendly LED count display. Intelligent barrier is compatible with IC cards, ID cards, barcode cards,
fingerprint readers, to provide a civilized and orderly channel for passengers, and ensure an effective management of
personnel access. The device can be widely applicable to railway stations, docks, subways, factories, buildings, intelligent
communities, hotels, clubs, enterprises and other occasions needing intelligent management of stream of people.
The device is divided into single movement for single and multi-channels, and dual movement for multi-chan.
2. Product basic information
TYPE: WJ series of flap barriers
Model::TPM001
Specification:1600*350*1000mm
3. Technical parameters
◇ Working voltage: AC220 ± 10% V/50 ± 10% HZ
◇ Drive motor: DC brush motor (24V)
◇ Channel width: 550mm
◇ Weight (single movement): 80Kg
◇ Barrier opening and closing time: 1-2 seconds
◇ duration from power on to working: 3 seconds
◇ auto-reset duration after failure: 10 seconds
◇ LED indicator: 2
◇ card reader windows: 2
◇ Directions: unidirectional or bidirectional
◇ Working environment: indoor, outdoor (shed required)
◇ Chassis material: domestic standard: (304) stainless steel
◇ Communication interfaces: RS485 standard; distance ≤ 1200 meters
◇ Temperature: -10 ° C - 50 ° C; Relative humidity: ≤ 90%, no condensation
◇ transit speed: 40 people / minute (normally open) ,25-30 people / minute (normally closed)
◇ Input interface: dry contact signal or 12V level signal or 12V pulse signal, pulse width ≥ 100ms; driving current ≥ 10mA
4. Functions and Features
1) Fault detection and alarm function for easy maintenance and use;
2) Running state is programmable through built-in small keyboard in the main control panel;
3) Mechanical anti-lipping structure, anti tailgating function; in case of blockage of telescopic arm, the motor will automatically stop within reset time, delay and reset again (until fully reset ), and the intensity is very small ( ≤ 2Kg);
4) Anti-tailgating protection function, if the barrier doesn’t receive any opening signal, the flap will be automatically locked
5) The flap synchronization is adjustable (for double flaps);
6) Automatic reset function; automatic reset function. after reading, the system will cancel the permission automatically
if a passenger fails to pass with required time.
7) Adjustable in normally open or normally closed state, to meet the requirements for different venues;
8) Available to connect with a variety of reading devices and receive relay switch signal;
9) Unidirectional or bidirectional control personnel access;
10) Remote control and management available via computer;
11) Delay automatic reset, the standard function is five-sec-delay automatic reset after opening;
12) Automatic-opening against power-down, and automatically closing against power-on, in compliance with fire fighting requirements.
13) Acousto-optic alarm function, tailgating alarm (automatically closing against reversed entry)
14) Counting function (optional);
15) Anti-clipping function (4 sets of infrared detectors);
16) Precise logical judgment, infrared reset function (4 or 6 sets of infrared detectors, optional);
17) Voice output, user-friendly prompt for correct entry (optional).
5. Main structure and configuration (single-channel)
◇ Chassis: 2
◇ Flap: 2
◇ Control panel: 2 sets
◇ Directional indicator: 4
◇ Switching power supply: 2
◇ Motor: 2
◇ Logical judger:1
◇ IR detector: 8/10 sets
◇ Voice module: 1 set (optional)
◇ Counter: 2 (optional)
◇ Movement and transmission device: 2 sets