Home > Products > Security & Protection > Access Control System

1. Product basic information

  TYPE： WJ series of flap barriers
    Model：：TPM002
    Specification：1400*300*1000MM

2.  Technical parameters:

◇ Supply voltage: DC24V ± 10%, 50HZ
◇ Motor: DC brush motor
◇  Working noise: 65 Db
◇  Transit speed: 30 times / min
◇ Classics material: GB 304 stainless steel
◇  Internal structure: steel frame structure
◇  channel maximum width: 990MM
◇ Flap material: acrylic (true color), or red/blue imported soft rubber
◇ Control signal: relay signal input
◇ Operating ambient temperature: -30 ℃ ~ 60 ℃
◇ Lighting prompt: green for passing, red for restriction
◇ Barrier opening and closing time: settable
◇ Input Interface: +12 V level signal or DC12V pulse signal, pulse width> 100ms.
◇ Waterproof and dustproof: less than IP32
◇ Relative humidity: ≤ 95%, no condensation
◇  Service life of the whole set: more than 5 million times of continuous opening and closing.

3. Functions and features 

1）the design is reasonable and reliable with low noise; and the flap is running stably with a long service life.
2）supporting standard switch signal input, convenient to connect with external switch, bar code systems, 
       ID / IC access control systems, fingerprint checker, face indicator and other control devices.

3）the barrier can run in a variety of operating modes such as bidirectional identification, fingerprint or face        identification; bi-direction restriction; directional reading, fingerprint or face recognition, one-bi-directional reading,

       fingerprint or face recognition, and free-passing, button switch or infrared sensor accessible in another direction.  
4) Anti-clipping structure, anti tailgating function; in case of blockage of telescopic arm, the motor will automatically 
       stop within reset time, delay and reset again (until fully reset ), and the intensity is very small ( ≤ 2Kg); 
 5) Anti-tailgating protection function, if the barrier doesn’t receive any opening signal, the flap will be automatically locked;
6) The flap synchronization is adjustable (for double flaps);
7) Automatic reset function; after reading, the system will automatically cancel the permission if a passenger fails to pass with required time;thus it effectively avoids overman passing.
8) anti-trailing to prevent overman passing without permission.
9) automatic reset function: after reading, the system will automatically cancel the permission and reset to the initial state if a passenger fails to pass with required time.
10) the barrier will be automatically open in case of power outage; and it will be automatically closed after power-on
11) waterproof, sun-resistant, cold-resistant, high temperature resistant.
12) unique drive system ensure more accurate and reliable null locking and unlocking of barrier;
13) it can be used in conjunction with other types of channel products.