| Model: | S1 |
|---|---|
| Brand: | UPM heat shrink |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Other Electrical & Electronic |
| Label: | bus bar insulation , heat shrink tubing , bus bar heat shrink |
| Price: |
-
|
| Min. Order: | 300 m |
| Last Online:06 Dec, 2024 |
S1-1 Bus Bar Insulation Heat Shrink Tube
| Dimensions 2.5:1 | ||||
| Reference | As supplied(mm) | After recovered(mm) | Standard length | |
| UPM S1-1 | ID min. | ID max. | WT nom. | m/spool |
| 15/6 | 15 | 6 | 1.5 | 30 |
| 30/12 | 30 | 12 | 1.5 | 30 |
| 50/20 | 50 | 20 | 1.5 | 30 |
| 75/30 | 75 | 30 | 1.5 | 30 |
| 100/40 | 100 | 40 | 1.5 | 30 |
| 120/50 | 120 | 50 | 1.5 | 30 |
| 150/50 | 150 | 50 | 1.5 | 30 |
| 175/70 | 175 | 70 | 1.5 | 30 |
| 3:1 | ||||
| Reference | As supplied(mm) | After recovered(mm) | Standard length | |
| UPM S1-1 | ID min. | ID max. | WT nom. | m/spool |
| 30/10 | 30 | 10 | 1.8 | 30 |
| 75/25 | 75 | 25 | 2.0 | 30 |
| 100/33 | 100 | 33 | 2.2 | 30 |
| 150/50 | 150 | 50 | 2.2 | 30 |
| 180/70 | 180 | 70 | 2.3 | 30 |
| Product selection | ||||
| Bus bar size (mm) | Single layer bus bar | Two layers bus bar | ||
| 20×3,25×3 | Φ30/10 | Φ30/10 | ||
| 30×3,30×4 | Φ30/10 | Φ30/10 | ||
| 30×10,40×4 | Φ75/25 | Φ75/25 | ||
| 40×10,50×5,50×6 | Φ75/25 | Φ75/25 | ||
| 50×8,50×10,60×6,60×8 | Φ75/25 | Φ75/25 | ||
| 60×10,80×6,80×8,80×10 | Φ100/33 | Φ100/33 | ||
| 100×8,100×10,100×12 | Φ150/50 | Φ150/50 | ||
| 100×15,120×10,120×12,120×15 | Φ150/50 | Φ180/70 | ||
| 150×12,150×15 | Φ180/70 |
Φ180/70 |
||
| S1(n)-10 Halogen Free Bus Bar Insulation Heat Shrink Tube | ||||
| Features | ||||
| Medium wall cross-linked polyolefin | Operating temperature: -40~105 ℃ | |||
| Bus bar insulation and protection | Shrink temperature: 125 ℃ | |||
| Reduces bus bar clearance requirement | Shrink ratio: 2.5:1 | |||
| Halogen free, RoHS compliant | Voltage class: 6~24KV | |||
| Protects against short circuit and electrical leakage caused by small animals | ||||
| Dimensions | ||||
| Reference | As supplied(mm) | After recovered(mm) | Standard length | |
| UPM S1(n)-10 | ID min. | ID max. | WT nom. | m/spool |
| 25/10 | 25 | 10 | 2.50 | 25 |
| 30/12 | 30 | 12 | 2.65 | 20 |
| 40/16 | 40 | 16 | 2.65 | 20 |
| 50/20 | 50 | 20 | 2.65 | 20 |
| 65/25 | 65 | 25 | 2.85 | 20 |
| 75/30 | 75 | 30 | 2.85 | 20 |
| 85/35 | 85 | 35 | 2.85 | 20 |
| 100/40 | 100 | 40 | 2.85 | 20 |
| 120/50 | 120 | 50 | 2.85 | 20 |
| 150/60 | 150 | 60 | 2.90 | 20 |
| 175/75 | 175 | 75 | 2.90 |
20 |
| Typical application | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Suitable for insulation and protection of bus bar against accidental flashover up to 24 KV | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Ideal for using in switchgears cabinets where space is limited and air spacing between bus | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
bars need to be kept at minimal
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
