Model: | HLP-12000 |
---|---|
Brand: | HET/OEM |
Origin: | Made In China |
Category: | Metallurgy , Mining & Energy / New Energy / Solar Energy |
Label: | 12kw inverter , off grid inverter , 48v solar inverter |
Price: |
US $500
/ pc
|
Min. Order: | 1 pc |
Last Online:13 Dec, 2014 |
HET-HLP Series Pure Sine Wave Inverter is a combination of an inverter, charger, solar power and Auto-transfer switch into
one complete system . It is packed with unique features and it is one of the most advanced inverter/chargers in the market today.
Feature of HP Series Inverter & Charger
Smart Remote Control (RMT)
Battery Temperature Sensor (BTS)
Automatic Generator Starting (AGS)
Support Solar Panel with MPPT Function
Designed to Operate under Harsh Environment
DC Start & Automatic Self-Diagnostic Function
Compatible with Both Linear & Non-Linear Load
Easy to Install & Easy to Operate & Easy to Solve
Low DC Voltage Supports Home & Office Appliances
Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
High Efficiency Design & “Power Saving Mode” to Conserve Energy
Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
13 Vdc Battery Recover Point, Dedicated for Renewable Energy Systems
8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
Electrical Specifications |
|||||||||||
|
Model |
1.0KW |
1.5KW |
2.0KW |
3.0KW |
4.0KW |
5.0KW |
6.0KW |
8.0KW |
10.0KW |
12.0KW |
Inverter Output |
Continuous Output Power |
1.0KW |
1.5KW |
2.0KW |
3.0KW |
4.0KW |
5.0KW |
6.0KW |
8.0KW |
10.0KW |
12.0KW |
Surge Rating(20s) |
3.0KW |
4.5KW |
6.0KW |
9.0KW |
12.0KW |
15.0KW |
18.0KW |
24.0KW |
30.0KW |
36.0KW |
|
Output Waveform |
Pure Sine wave/Same as input(Bypass Mode) |
||||||||||
Nominal Efficiency |
>88%(Peak) |
||||||||||
Line Mode Efficiency |
>95% |
||||||||||
Power Factor |
0.9-1.0 |
||||||||||
Nominal Output Voltage rms |
100-110-120Vac / 220-230-240Vac |
||||||||||
Output Voltage Regulation |
±10% RMS |
||||||||||
Output Frequency |
50Hz ± 0.3Hz/60Hz ± 0.3Hz |
||||||||||
Short Circuit Protection |
Yes( 1sec after fault ) |
||||||||||
Typical transfer Time |
10ms(Max) |
||||||||||
THD |
< 10% |
||||||||||
DC Input |
Nominal Input Voltage |
12.0Vdc |
|||||||||
( *2 for 24Vdc, *4 for 48Vdc) |
|||||||||||
Minimum Start Voltage |
10.0Vdc |
||||||||||
Low Battery Alarm |
10.5Vdc / 11.0Vdc |
||||||||||
Low Battery Trip |
10.0Vdc / 10.5Vdc |
||||||||||
High Voltage Alarm |
16.0Vdc |
||||||||||
Low Battery voltage recover |
15.5Vdc |
||||||||||
Idle Consumption-Search Mode |
< 25 W when Power Saver On |
||||||||||
Charger |
Output Voltage |
Depends on battery type |
|||||||||
Charger Breaker Rating |
10A |
15A |
20A |
20A |
20A |
30A |
30A |
40A |
40A |
40A |
|
Max Charge Power Rate |
1/3 Rating Power |
||||||||||
Battery Initial Voltage for Start Up |
10-15.7V for 12V( *2 for 24V, *4 for 48V) |
||||||||||
Over Charge Protection Shutdown |
15.7V for 12V (*2 for 24V, *4 for 48V) |
||||||||||
Remote Control |
Yes(Optional) |
||||||||||
Bypass & Protection |
Input Voltage Waveform |
Sine wave (Grid or Generator) |
|||||||||
Nominal Voltage |
110Vac |
120Vac |
220Vac |
230Vac |
|||||||
Max Input AC Voltage |
150VAC For 120Vac LV Mode;300VAC For 230Vac HV Mode; |
||||||||||
Nominal Input Frequency |
50Hz or 60Hz (Auto detect) |
||||||||||
Low Freq Trip |
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
||||||||||
High Freq Trip |
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
||||||||||
Overload protection(SMPS load) |
Circuit breaker |
||||||||||
Output Short circuit protection |
Circuit breaker |
||||||||||
Bypass breaker rating |
10A |
15A |
20A |
30A |
40A |
40A |
40A |
50A |
63A |
63A |
|
Transfer switch rating |
30amp for UL & TUV |
40amp for UL |
80amp for UL |
||||||||
Bypass without battery connected |
Yes (Optional) |
||||||||||
Max bypass current |
30amp |
40amp |
80amp |
||||||||
Solar Charger(Optional) |
Rated Voltage |
12Vdc / 24Vdc / 48Vdc |
|||||||||
Solar Input Voltage Range |
15-30Vdc / 30-55Vdc / 55-100Vdc |
||||||||||
Rated Charge Current |
40 ~ 60A |
||||||||||
Rated Output Current |
15A |
||||||||||
Self Consumption |
< 10mA |
||||||||||
Bulk Charge |
14.5V(default) |
( *2 for 24Vdc, *4 for 48Vdc) |
|||||||||
Floating Charge |
13.5V(default) |
||||||||||
Equalization Charge |
14.0V(default) |
||||||||||
Over Charge Disconnection |
14.8V |
||||||||||
Over Charge Recovery |
13.6V |
||||||||||
Over Discharge Disconnection |
10.8 V(default) |
||||||||||
Over Discharge Reconnection |
12.3V |
||||||||||
Temperature Compensation |
-13.2mV/°C |
||||||||||
Ambient Temperature |
0 ~ 40°C(Full load) 40 ~ 60°C(Derating) |
||||||||||
Mechanical Spec |
Mounting |
Wall Mount |
|||||||||
Inverter Dimensions(L*W*H) |
388*415*200mm |
488*415*200mm |
588*415*200mm |
||||||||
Inverter Weight(Solar Chg)KG |
21+2.5 |
22+2.5 |
23+2.5 |
27+2.5 |
38+2.5 |
48+2.5 |
49+2.5 |
60+2.5 |
66+2.5 |
70+2.5 |
|
Shipping Dimensions(L*W*H) |
550*520*310mm |
650*520*310mm |
750*520*310mm |
||||||||
Shipping Weight(Solar Chg)KG |
23+2.5 |
24+2.5 |
25+2.5 |
29+2.5 |
40+2.5 |
50+2.5 |
51+2.5 |
62+2.5 |
68+2.5 |
72+2.5 |
|
Display |
Status LEDs / Status LEDs+LCD |
||||||||||
Standard Warranty |
1 Year (Optional) |