| Model: | - |
|---|---|
| Brand: | AQTY |
| Origin: | Made In China |
| Category: | Industrial Supplies / Rubber & Plastics Machine |
| Label: | Crushing mill , rubber , plastic |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:19 Dec, 2014 |
Crushing mill
Features:
1. Apllication : Application
Mainly use to break the sizing material .
It is applicable for breaking the sizing material.
2. the specification : Main Technical Parameters:
2.1 dia. of Working roller : front rotor ø 560mm,
Roller working diameters: rear rotor ø 510mm
2.2 Length of working roller: 800mm
Roller working length : 800mm
2.3 Working speed of front rotor: 25.6m/min
2.4 Rotational speed of the rotor (front/rear ): 1：1.3
2.5 Roller distance adjustment: Range :0.5~15mm
Nip adjustment of Roller Way : manual
2.6 Production capacity : 2000kg/h
2.7 Main motor : power :75kw
Rotating speed : 980 r/min
2.8 velocity ratio of decelerator : 11.56
2.9 pressure of safety disc : 1100±30KN
2.10 Overall dimensions : (LX W X H): 4973×2313×1775mm
2.11 Weight ( expect electrical system ): 16t
2.12 Drive direction : right-drive (left-drive )
Transmission Transmission Transmission
3. working and structure feature :
Operation principle
This machine consists of machine body ,driving device , distance adjustment device , safety device , temperature of roller adjustment device , lubrication system , emergency stop and chassis base
the front and rear rotor are the main spare parts, through the power machine ,decelerator , under the ration certain speed , to extrude and cut sizing material from opposite direction rotating .
the workpiece surface of roller is made of chilled cast iron, with features as rigid and wear resistant, the two ends of roller is supported by rolling bearing . the roller is hollow, inner bore processing , heating ,cooling on average . The distance between two rollers can be adjustable in given scope . the machine is configured with safety device , in case of overloading ,the safety disc is broken in order to protect the main spare parts from damaging owing to overloading . when, pull the emergency rope of brake device (or touch switch ) ,it will brake immediately for the purpose of safety and reliability. The temperature for roller surface can be accommodated by adjustment system of roller temperature. as required. Equipped with stop pad at both ends of roller working section avoids sizing material leaking. The material holding plate is installed under the roller.The complete machine adopts integrated base to facilitate installation, adjustment and stability for transmission.
|
New-type hardened gear decelerator |
XKP-450B(−G) |
XKP-560A |
|
Roll dia × Length (mm) |
400×800(single、double groove) |
Front roll 510×800（groove、glossy）
|
|
Linear speed of front roll (m/min) |
20.58 |
28.13 |
|
Velocity ratio of rollers ( front :rear ) |
1:1.38 |
1:1.33 |
|
Main motor power (kw) |
75 |
90（110） |
|
Specification of main decelerator |
ZLY280−12.5 |
ZLY355−14 |
|
Capacity （kg/h） |
∼200 |
∼250 |
|
bush/lubrication |
nylon/dry oil pump（manually pressing dry oil pump or diluting dry oil pump as reference） |
|
|
Overall dimensions (L×W×H) |
4500×1800×1950 |
4700×2450×1900 |
|
Weight (t) |
12 |
22 |
Contact information:
Athena Wang
(Export manager)
Email:aoqian@aq-rubber.com
Tel:+86-411-66007299 Fax:+86-411-66007361
Mp:+86-411-15998489939
Skype:cathywang.2012
