Home > Products > Industrial Supplies > Rubber & Plastics Machine

Rubber injection molding machine

Purpose:
It is usable for injection molding and curing operations of rubber products with high density, high accuracy, complicated shape, thick wall and inlays.
Features:
1. The control system provides three stages (multiple stages) of injection rates and pressures and two stages of pressure holding to meet different requirements of stock for the injection condition. The electronic position scale is provided to give precise control, improving the injection accuracy.
2. The mold closing and takeout system has the three-stage mold separating and takeout unit. The upper segment of the mold can be opened fully up to the angle of 70° so that the mid segment can be separated easily, which makes the operation convenient.
3. The self-contained oil heating system with the PID thermostat is used to control the temperature at the stock storage stage and the injection stage. The heated spots on the work table are distributed rationally and controlled with the PID thermostat.
4. The specialized computer control system is provided for the electrical control system. All operations can be displayed on the touch screen and all parameter setting is convenient and visual. The operations in the whole process are monitored with the functions of malfunctional self-diagnosis and alarm. It has the space for 100 sets of mold operation parameters and the preparation period before production is short.
5. The low-noise hydraulic circuit is used for the hydraulic system so that the machine makes less noise during operation.
6. The two-hand operated infrared safety protector is used to ensure the safety of the operator. It has the protection function of locking the mold at low pressure to protect the mold from damage.

Contact information:

Athena Wang

(Export manager)

Email:aoqian@aq-rubber.com

Tel:+86-411-66007299 Fax:+86-411-66007361

Mp:+86-411-15998489939

Skype:cathywang.2012