| Model: | RTF1000 |
|---|---|
| Brand: | Retop |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronics Stocks |
| Label: | Ground Fault Locator , Ground Fault Tester |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:06 Jan, 2015 |
RTF1000 Ground Fault Locator
Introduction
RTF1000 Ground Fault Locator can cause power break-off which is costly to repair. Fast localization and elimination of grounding faults will be significant for electricians
and technicians. It is also required by DIN VDE 0100-410 (VDE 0100-410): 2007-06 chapter 411.6.3.1 and
IEC 60364-4-41 chapter 413.1.5.4. RTF1000 Ground Fault Locator is developed to fast detect, track and locate virtual
groundingfaults on DC systems. This spares you from hours of unnecessary troubleshooting and helps to increase
the reliability of your electrical equipment. It is widely used in locomotive, telecom, power utilities, etc
Features
l Patented technology, pinpoint current leakage fault with grounding resistance lower than 1MΩ
l Innovative dual-clamp for signal receiver, each clamp has two sizes of opening jaw for different conductors
l One pare of clamp working together, effective cancel capacitive interference when system is online
l Precise current direction (positive or reversed) indicating for leaking currrent help fast locate the faulty grounding
l Adjustable output frequency on signal receiver effectively avoids interference from DC system itself
l Signal receiver can set reference in different points for signal comparision, very fast for fault orientation
l Digital signal processing technoligy for detecting grounding resistance and capactitive resistance
l With built-in band pass filter to bypass different interference signals in the ambient environment
l No disconnection of the electrical installation, ground fault location is carried out during operation
l Frequency spectrum analysis can test ambient frequencies, helps select the right frequency for the right DC system
l Signal-generator with adjustable output voltage (24V~1000V) and output frequency (1～325Hz) for different DC systems
l Multi-ways to indicate ground fault: sensitive current direction, phase angle, comparison of signal strength.
Technical specification
| Ground fault location | Output voltage: 24V, 48V, 110V, 220V, 500V and 1000V
Output frequency: 10Hz(1Hz, 50Hz, 60Hz & 325Hz as option) Fault location sensitivity: ≤ 1MΩ Current detect sensitivity of AC/DC circuit: ≥ 0.5mA Current detector:8mm(diameter) & 20mm(jaw opening), one clamp, dual-range |
| Power supply | Signal generator:
4200mAh/16.8V chargeable Li-ion battery Input: AC220V/110V, output: DC16.8V/2A Signal receiver: 2400mAh/8.4V rechargeable Li-ion battery Charger input AC220V/110V, output:DC8.4V300mA |
| Power consumption | ≥4 hours |
| Display |
Signal generator: 128×64bit LCD Signal receiver: 240×320 pixel 3.5″ TFT touch screen |
| Memory | 128M |
| Working temperature | -10℃～55 ℃ |
| Dimension | L425*W340*H130mm |
| Weight | 7.0 kg |
| Payment Terms: | T/T,Western Union,Paypal,Credit Card |
|---|---|
