| Model: | H04-1 |
|---|---|
| Brand: | Keren |
| Origin: | Made In China |
| Category: | Chemicals / Coatings, Varnish & Painting |
| Label: | epoxy ceramic coatin , Antirust coating , water tank coating |
| Price: |
-
|
| Min. Order: | 1000 kg |
| Last Online:23 Jan, 2015 |
Product features and application scope
“Keren” epoxy ceramic coating is composed of epoxy resin, quartz powder, titanium dioxide and curing agent. After completely cured, coating film is non-toxic and odorless, suitable for drinking water container and pipe wall coating.
Material in coating meet requirements of "Drinking water distribution equipment and protective materials evaluation of health and safety standards" (2001).
Product health and safety
Health and safety of the product meet the Ministry of Health "Drinking water distribution equipment and protective materials evaluation of health and safety" requirements.
The main technical indicators
|
Item |
Technical indicators |
||
|
Surface of coating |
Group A |
Brown viscous liquid |
|
|
Group B |
White viscous liquid |
||
|
Ratio of Group A and Group B (weight) |
1:1 |
||
|
Drying time (25℃) h ≤ |
Set to touch |
10 |
|
|
Completely dry |
24 |
||
|
Adhesion of film MPa≥ |
10 |
||
|
Flexibility |
No cracks |
||
Method of application
Used in metal substrate surface
Polish inner surface of cast iron pipe or steel vessel，and clean up all all the debris. There should be no more than 50% of the lining of the inner tube of metal protruding tumor thickness, etc.
2．Sandblast inner surface of Cast iron pipe or steel container
All interior surfaces sandblasted to reach GB / T Sa 1/2 8923 level (near white level)
3．Cast iron pipe or steel container linings
①After heated to 70 ℃，hang the cast iron pipe or steel container l on the turntable
②The groups A and B of epoxy ceramic coating are heated to 70 ℃in a state of agitation
③Tubes or containers are rotate on the turntable, then using a spraying machine , 1: 1 ratio of epoxy ceramic coating should be sprayed to the surface of the tube or the container which is maintaining 65 ℃~ 70 ℃, and the inner liner should be reach to a specified thickness in the contract after once cured.
④Tube or container on the turntable continues to rotate, 50 ℃~ 65 ℃hot air from the stove should be blow into pipe or container, until the surface of the lining completely cured, it should be switched into health oven maintaining at least above 20 ℃in 24hs, then, the liner fully cured.
For concrete substrate surface
Concrete substrate subject to at least 28 days of the Nature Conservancy. After completely dry, remove surface dust and dirt and then use this product for coating.
Construction environmental conditions: substrate temperature should be above the dew point 3 ℃, relative humidity less than 85%, and it is not suitable for construction when outdoor temperature is below 5 ℃. Indoor heating measures can be taken without compromising security, such as preheating surface or dried with hot air ventilation and so on.
Precautions
1. When used for drinking water container and the pipe wall, it should be taken to ensure that the required time is to enough, so that the coating can completely cured.
2. Before officially putting into use, it should be rinsed at least 2 to 3 times with clean water, and then rinsed twice with adequate drinking water.
Packaging, storage, transportation
1．This product is packaged by 20L sealed drums or according to customer requirements.
2．This product in drums should be stored or transported upright, away from fire and avoid from sun exposure
3．This product should be stored in the warehouse where is cool, dry, ventilated and no ignition sources near, the shelf life is one year in the original container. If beyond warranty period, according to the product standard for testing, if they meet the technical specifications , then it can be used still.
