Home > Products > Industrial Supplies > Machine Hardware > Valves

600X hydraulic control valve

　　600X hydraulic control valve features: the electric control valve installed in the pipeline. The use of the guide pipe, remote control solenoid valve opening and closing to control the main valve opening and closing.

　　Electric hydraulic control valve from the main valve, solenoid pilot valve, needle valve, ball valve, micro shaped filter and pressure gauge hydraulic control over the system. Through the solenoid valve can be achieved on the valve opening and closing of the remote control. The speed of opening and closing can be controlled after the installation of an additional device is added. When the valve from the inlet water, the water flow through the valve into the main valve control room, when the solenoid pilot valve opening control room of the water by the solenoid pilot valve, ball valve outflow. The valve opening is greater than the needle valve opening, the main valve control room pressure is very low, the main valve in the fully open state. When the solenoid pilot valve is closed, the main valve control room of the water can not flow out, the control room boost. Push the diaphragm off the main valve. This product uses the pilot valve to control the valve opening and closing, save energy. Can replace other large power plant, widely used in high-rise buildings, living areas and other water supply system and urban water supply project.