| Model: | CG-S3 |
|---|---|
| Brand: | CALET |
| Origin: | Made In China |
| Category: | Industrial Supplies / Rubber & Plastics Machine |
| Label: | robot arm , robot for injection , robot for molding |
| Price: |
-
|
| Min. Order: | - |
| Last Online:10 Aug, 2016 |
1.Always are standard as follow,but also can be customized by customer request and make the most suitable manipulator for your injection molding machine.
2.Imported equipment processing center to ensure and improve every components precision.
3.Be selected as "National high and new technology enterprises",having Professional R&D team
| MODEL | CG1200WS-S3 | CG1400WS-S3 | CG1600WS-S3 | CG1900WS-S3 | CG2200WS-S3 | CG2500WS-S3 | CG3000WS-S3 | CG3500WS-S3 |
| Arm type | Double section single arm | |||||||
| Suitable for
injection molding machine |
400-680 tons | 500-1000 tons | 600-1200 tons | 800-1800 tons | 1200-2500 ton | 1600-3300 ton | 1800-4000 ton | 2000-5000 ton |
| Vertical stroke | 1200mm | 1400mm | 1600 mm | 1900mm | 2200mm | 2500mm | 3000mm | 3500mm |
| Draw stroke
(before and after) |
300-1200mm | 300-1500mm | 300-1500mm | 400-1800mm | 400-1800mm | 550-2100mm | 550-2100mm | 550-2300mm |
| Horizontal stroke | 2000mm | 2300mm | 2700mm | 3000mm | 3400mm | 3800mm | 4200mm | 4500mm |
| Max load
(including fixture) |
15 kg (Posture torque 40N.M) |
30 kg (Posture torque 82N.M) |
50 kg (Posture torque 176N.M) |
50/80 kg
(Posture torque 176N.M) (Posture torque 265N.M) |
80 kg
(Posture torque 265N.M) |
|||
| Minimum
fetch time |
2.0sec | 2.1sec | 2.4sec | 2.8sec | 3.3sec | 3.8sec | 4.8sec | 5.8sec |
| Driven system | Servo motor | |||||||
| working pressure | 5-7kgf/cm2 | |||||||
| Air consumption
(NI/cycle) |
3.5 | 3.5 | 4.0 | 4.0 | 5.5 | 5.5 | 5.5 | 8.0 |
| power consumption | 4.0KVA | 5.0KVA | 7.0KVA | 8.0KVA | 11.0KVA | |||
| N.W | 900kg(+-5%) | 950kg(+-5%) | 1300kg(+-5%) | 1400kg(+-5%) | 2100kg(+-5%) | 2300kg(+-5%) | 2700kg(+-5%) | 3200kg(+-5%) |
1.When working pressure is less than 5kgf/cm2,the max load will reduce and circulation time will be add
2.When using Absorb function,need to add the extra 10 NI/cycle Air consumption.
advantage of this product :
1.used Precision guide rail with aluminum alloy structure beam,Reduce the height of up/down arms,greatly improve the stability and speed of arm running
2.Three axis all use servo motors,transfering by Rack and pinion to Avoid the elasticity because of very long synchronous belt,so that it can ensure the accurate positioning of the large stroke operation.
3.The control system can realize the three axis linkage to short the positioning time.
