| Model: | CFV-S4 |
|---|---|
| Brand: | CALET |
| Origin: | Made In China |
| Category: | Industrial Supplies / Rubber & Plastics Machine |
| Label: | robot arm , robot for injection , injection molding |
| Price: |
-
|
| Min. Order: | - |
| Last Online:10 Aug, 2016 |
| MODEL | CF700V-S4 | CF800V-S4 | CF900V-S4 |
| Arm type | Single section single arm | ||
| Suitable for injection molding machine | 100-250 tons | 150-300 tons | 200-350 tons |
| Vertical stroke | 700mm | 800mm | 900mm |
| Draw stroke
(before and after) |
0-400mm | ||
| Horizontal stroke | 0-350 mm | ||
| Max load(including fixture)
Posture torque 13N.M |
5 kg | 5 kg | 5 kg |
| Minimum fetch time | 0.9sec | 1.0sec | 1.1 sec |
| Driven system | Servo motor | ||
| working pressure | 5-7kgf/cm2 | 5-7kgf/cm2 | 5-7kgf/cm2 |
| Air consumption
(NI/cycle) |
0.4 | 0.4 | 0.4 |
| power consumption | 2KVA | 2KVA | 2KVA |
| N.W | 720kg(+-5%) | 740kg(+-5%) | 760kg(+-5%) |
1.When working pressure is less than 5kgf/cm2,the max load will reduce and circulation time will be add
2.When using Absorb function,need to add the extra 10 NI/cycle Air consumption.
advantage of this product :
1.Can quickly take the product out,Shorten the molding cycle, improve productivity.
2.The arm used double slide design, greatly improving the mechanical rigidity
3.Full servo drive is adopted to improve the response efficiency of the whole machine.
4.Side posture axis can be rotated, with the V type side to take function, improve the scope of the use of the product
