| Model: | SSF380-S |
|---|---|
| Brand: | - |
| Origin: | Made In China |
| Category: | Industrial Supplies / Other Industrial Supplies |
| Label: | Super energy saving , Save the cooling wat |
| Price: |
¥440
/ pc
|
| Min. Order: | 40 pc |
| Last Online:01 Jun, 2016 |
Our smallest SSF380-S injection molding machines are applied to produce precision plastic parts like electronic small parts, plastic color chips and other small plastic parts, with its small size, fast cycle time, friendly operation screen, warmly welcomed by customers.
Advantages of servo motor
1.There is no extra energy consumption due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, servo energy saving injection molding machines will save 20%~80% energy and bring you prominent economic benefit.
2.High precision, high response: The pressure sensor and rotary encoder with high precision and high sensitivity achieve pressure, flow closed-loop control, allowing the repeat precision error to be less than 1%. It only takes 0.05 second to reach the largest output power.
3.Save the cooling water: No constant flow pump and speed set motor overflow heating. When the temperature of hydraulic oil is lower, the cooling water is greatly reduced.
4.Super energy saving: Compared with variable pump system, it can save 40% of the power. Compared with constant flow pump and fixed speed motor. It can save 60% of the power.(Different kinds of products have different energy saving effects.
5.Low noise: The noise is below 78db. Servo motor has almost no noise when no movement of machine.
| Embed HTML Code: | SSF380-S Parameters Items Parameter Unit Parameter Value Injection Unit Screw diameter mm A B 27 30 Screw L/D ratio L/D 18.4 16.5 Shot volume(theoretical) Cm3 48 58 Injection weight(PS) g 44 53 Oz 1.5 1.8 Plasticizing Capacity g/s 4.3 5.9 Injection rate g/s 35 43 Injection pressure Mpa 187 151 Screw speed rmp 170 Clamping unit Clamp force KN 380 Open stroke mm 235 Distance between tie bars (W*H) mm 240*240 Max mould thickness mm 270 Min mould thickness mm 80 Ejector stroke mm 60 Ejector force KN 17.5 Ejector number PC 1 Dia of mould location hole mm 80 Others Max pump pressure Mpa 14 Pump motor power KW 4 Heating power KW 3.2 Machine dimension(L*W*H) m 2.9*1.0*1.4 Machine weight T 1.35 Oil tank capacity L 90 |
|---|---|
