| Model: | SSF1180-S |
|---|---|
| Brand: | - |
| Origin: | Made In China |
| Category: | Industrial Supplies / Other Industrial Supplies |
| Label: | SSF1180-S Parameters , Ejector force |
| Price: |
¥460
/ pc
|
| Min. Order: | 40 pc |
| Last Online:01 Jun, 2016 |
SSF1180-S injection molding machines, lies in servo motor serials, applies to the injection molding process of various kinds of thermoplastics.
Advantages of servo motor
1.There is no extra energy consumption due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, servo energy saving injection molding machines will save 20%~80% energy and bring you prominent economic benefit.
2.High precision, high response: The pressure sensor and rotary encoder with high precision and high sensitivity achieve pressure, flow closed-loop control, allowing the repeat precision error to be less than 1%. It only takes 0.05 second to reach the largest output power.
3.Save the cooling water: No constant flow pump and speed set motor overflow heating. When the temperature of hydraulic oil is lower, the cooling water is greatly reduced.
4.Super energy saving: Compared with variable pump system, it can save 40% of the power. Compared with constant flow pump and fixed speed motor. It can save 60% of the power.(Different kinds of products have different energy saving effects.
5.Low noise: The noise is below 78db. Servo motor has almost no noise when no movement of machine.
| Embed HTML Code: | SSF1180-S Parameters Items Parameter Unit Parameter Value Injection Unit Screw diameter mm A B C 35 38 42 Screw L/D ratio L/D 22 20.2 18.4 Shot volume(theoretical) Cm3 163 192 235 Injection weight(PS) g 148 175 213 Oz 5.2 6.2 7.5 Plasticizing Capacity g/s 12 17 23 Injection rate g/s 89 105 128 Injection pressure Mpa 219 186 152 Screw speed rmp 210 Clamping unit Clamp force KN 1180 Open stroke mm 350 Distance between tie bars (W*H) mm 370*370 Max mould thickness mm 380 Min mould thickness mm 150 Ejector stroke mm 120 Ejector force KN 38 Ejector number PC 5 Dia of mould location hole mm 125 Others Max pump pressure Mpa 16 Pump motor power KW 13 Heating power KW 7.3 Machine dimension(L*W*H) m 4.3*1.28*1.9 Machine weight T 3.4 Oil tank capacity L 230 |
|---|---|
