| Model: | 1.2344/H13 stee |
|---|---|
| Brand: | DIN 1.2344 / AISI H13 Tool Steel |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Bars, Rods, Angles, and Stainless Steel Shapes |
| Label: | 1.2344 Tool Steel , H13 Tool Steel , 1.2344/H13 steel |
| Price: |
-
|
| Min. Order: | - |
| Last Online:05 Jul, 2016 |
1.2344 Tool Steel
|
Standards |
DIN |
AISI |
JIS |
ГОСТ |
|
X40CrMoV51 |
1.2344 |
H13 |
SKD61 |
4Х5МФ1С |
ALTA SPECIAL STEEL supply DIN 1.2344 / AISI H13 in round bar, plate, square, sheet and block.
Chrome–molybdenum–vanadium-silicon steel for hardening in oil and in air with very good hardenability (the steel is hardened in the whole cross-section up to the diameter of about 150 mm), high firmness during the heat and resistance to the tempering and the wear (higher than by the steel 1.2343), very good toughness and plastic properties during normal and also higher temperatures. Further the steel has a very good resistance to tearing of thermal fatigue (lower than by the steel 1.2343) and higher sensitivity to quick changes of temperature than by the steel 1.2343. The steel is suitable for the heat treatment also for firmness over 1765 N/mm2 and for tools cooled by water. It is well-workable during the heat and well-workable in the soft-annealed state.
We welcome your inquiries for tool steel, please contact us for quotation sales@altaspecialsteel.com
_________________________________________________________________________________________
Chemical Composition
|
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
|
0.37-0.42 |
0.90-1.20 |
0.30-0.50 |
≤0.030 |
≤0.030 |
4.80-5.50 |
1.20-1.50 |
0.80-1.15 |
Product Range
Round bars : Dia 8mm - 500mm
Flat bars : Thick 8mm - 405mm, width up to 810mm
_________________________________________________________________________________________
Applications : casting dies for aluminum, magnesium and zinc, extrusion dies and adaptor ring, hot stamping and press forge dies, Shear blades for hot work and hot swaging dies. Firm and movable parts meeting the liquid metal, inserts of functional parts of core molds, inlet cases, slide-valves, dividers etc. The steel can also be used for tools for hot cutting, small and middle-sized shear blades, trimming dies and cutting thorns.
_________________________________________________________________________________________
Heat Treatment
|
Way |
Temperature[℃] |
Remark |
|
Forging |
900 - 1100 |
|
|
Soft annealing |
750 - 780 |
Max. 229HB after annealing |
|
Quenching |
1010 - 1030 |
Cool smaller and simpler tools in oil up to about 100 °C, and then in air |
|
Cool bigger and difficult-shaped tools in air or in thermal bath at 500-550 °C |
||
|
Tempering |
540 - 560 |
|
|
℃ |
400 |
500 |
600 |
650 |
700 |
|
HRC |
54 |
56 |
48 |
42 |
32 |
