Model: | 1.2367 steel |
---|---|
Brand: | 1.2367 Tool Steel |
Origin: | Made In China |
Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Bars, Rods, Angles, and Stainless Steel Shapes |
Label: | 1.2367 Tool Steel , 1.2367 round bars , 1.2367 flat bars |
Price: |
-
|
Min. Order: | - |
Last Online:05 Jul, 2016 |
1.2367 Tool Steel
Standards |
DIN |
AISI |
JIS |
ГОСТ |
X38CrMoV53 |
1.2367 |
|
|
4Х5М3Ф |
ALTA SPECIAL STEEL supply DIN 1.2367 in round bar, plate, square, sheet and block.
Chrome–molybdenum–vanadium steel for hardening in oil and in air with very good hardenability, high firmness during the heat and resistance to the tempering, very good toughness and plastic properties during normal and also higher temperatures. Further the steel has a very good resistance to tearing of thermal fatigue and low sensitivity to quick changes of temperature. The steel is appropriate for the heat treatment also for firmness over 1800 N/mm2 and for tools cooled by water. It is well-workable during the heat and well-workable in the soft-annealed state.
We welcome your inquiries for tool steel, please contact us for quotation sales@altaspecialsteel.com
_________________________________________________________________________________________
Chemical Composition
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
0.35-0.40 |
0.30-0.50 |
0.30-0.60 |
≤0.030 |
≤0.030 |
4.70-5.20 |
2.70-3.30 |
0.40-0.70 |
Product Range
Round bars : Dia 8mm - 500mm
Flat bars : Thick 8mm - 405mm, width up to 810mm
_________________________________________________________________________________________
Applications : for molds for firm and movable core parts and other parts of molds for pressure casting of aluminum alloys and large series of castings of zinc and magnesium alloys. Tools for hot mechanical working, highly stressed small and middle-sized dies and inserts of dies. Dies, thorns, jaws and punches especially with the high firmness over 1800 N/mm2 cooled by water. Highly stressed extruders and other auxiliary tools for extrusion of non-ferrous metals during the heat, extrusion dies for aluminum and its alloys. Tools for hot cutting, e.g. small or middle-sized shear blades, trimming dies and cutting thorns.
_________________________________________________________________________________________
Heat Treatment
Way |
Temperature[℃] |
Remark |
Forging |
850 - 1050 |
|
Soft annealing |
800 - 840 |
Max. 230HB after annealing |
Quenching |
1030 - 1050 |
Cool in oil or air |
Tempering |
540 - 560 |
|
℃ |
400 |
500 |
600 |
650 |
700 |
HRC |
53 |
54 |
52 |
46 |
36 |